Electronics Forum | Wed Jun 23 18:23:32 EDT 1999 | Tom B.
Even though you may find a pad-pad thru-hole spacing, part body size, orientation, and insertion head tooling clearences may be the deciding factor in spacing. 1. Part body diameter will dictate component centroid spacing. ---[][][][
Electronics Forum | Wed Jun 23 15:49:30 EDT 1999 | Kelly Morris
In the IPC-SM-782 (Surface Mount Design and Land Pattern Standard) it recommends a minimum of .040" between bottomside wavesoldered chip pads. Where might I find a similar IPC recommendation for minimum space between thru-hole pads? Does anyone kno
Electronics Forum | Thu Aug 29 20:01:23 EDT 2002 | davef
Many people use the same spacing [and pad designs] as they use for primary side SMT. We don�t. DOWN STREAM SMT-TO-SMT SPACING: In addition to proper orientation, components cannot be immediately upstream of terminations that are to be soldered or b
Electronics Forum | Thu Apr 30 22:40:32 EDT 2009 | davef
Selective Wave Soldering DoE to Develop DfM Guidelines for Lead and Pb-Free Assemblies Written by Makram Boulos, Craig Hamilton, Mario Moreno, Ramon Mendez, German Soto and Jessica Herrera Circuits Assembly Magazine, 31 December 2008 19:00
Electronics Forum | Mon Apr 27 02:44:07 EDT 2009 | michafogel
Can someone point me to a standard, if there is any, or design rule regards with preffared spacing between PTH and SMT pads for LF wave soldering process (SAC alloy)
Electronics Forum | Thu Apr 30 06:14:26 EDT 2009 | michafogel
Thanks , I'll try it too.
Electronics Forum | Fri May 01 06:49:31 EDT 2009 | davef
minimum space between selective wave soldering pallet's opening to the nearest PTH or SMT pad? * http://www.agicorp.com/pdf_files/Designguidelines903.pdf * http://www.datumdynamics.com/resources/dfm_wavesolder.html?PHPSESSID=a73b3bc8bbd55519bffbb68
Electronics Forum | Thu Apr 30 02:39:48 EDT 2009 | michafogel
Thanks for the info so far, but still need a number or a formula to calculate. The site you have point me to can support in a way, but if I want to release a design procedure to our editors, a number will be very helpful. One more issue is what can b
Electronics Forum | Tue Apr 28 04:07:56 EDT 2009 | davepick
There's a nice tool on this site - http://www.enhancetechnical.co.uk/ Click on Internet Tools and then the image - brings up a useful interactive tools which helps understand influences on wave solder bridges. Dave
Electronics Forum | Tue Apr 28 07:45:07 EDT 2009 | davef
When using high tin solder, doesn't proper specing to avoid the effects of tin whiskers become at least as large an issue as proper specing for defect-free wave solder processing?
