Electronics Forum | Thu Jun 29 17:38:51 EDT 2006 | flipit
I might be wrong since I don't know this piece of equipment but I think ROL might be a better measure. For 63/37 it used to be 20 ppm ROL (residual oxygen level) was about what you needed for a reflow oven. This is to take full advantage of all tha
Electronics Forum | Thu Jun 29 10:45:46 EDT 2006 | stepheniii
We have an ERSA Versaflow Ecoselect selective wave soldering machine. It works well except it needs nitrogen. You can't even move the table around if your nitrogen tank is empty. The spec sheet says Required degree of purity: Nitrogen liquid 5.0
Electronics Forum | Fri Jun 30 08:14:03 EDT 2006 | slaine
I looked into nitrogen generators, it was 4 years back and I was trying to get 99.995 i think. About �20,000 for the generator then another �20,000 for the compressor you need to force the air in. I spoke with David Groome of BOC UK 01709 842358
Electronics Forum | Tue Jul 04 19:37:05 EDT 2006 | two cents
100 PPM or 99.99% purity is sufficient for any soldering application. There are a number of manufacturers that make PSA style nitrogen generators that are great systems for electronics applications. They are low maintenance and will pay for themselve
Electronics Forum | Fri Jun 30 09:03:09 EDT 2006 | Frank
The manufacterer of our machine recommends 99.999%. At their presentation before we purchased the machine they showed an example of using different purity levels. When they whiched the supply to 99.99 and then to 99.95 you can visibly see the diffe
Electronics Forum | Sun Jun 20 16:58:31 EDT 1999 | Chrys Shea
| Has there anyone bold enough to try this in their shops? My cubemate just got through telling me that at his last shop, they had bare copper boards (no HASL, no OSP, no nothing), with minimal solderability problems. | Is your cubemate the same gu
Electronics Forum | Tue Mar 07 21:28:30 EST 2023 | stephendo
What purity? To get 99.999% pure you will need dewers of liquid nitrogen or a two stage system. (and a dewer will last about a month and a half even if you don't use it as it outgasses.) But you can get reasonable purity with a wall mounted single s
Electronics Forum | Mon Aug 19 13:00:31 EDT 2019 | ameenullakhan
Thanks Steve for mentioning the purity level .., Our purchase and sourcing team was asking us what is our expectation on purity level. Based on which they are checking with supplier. So wanted to know any standard which is followed for the same. R
Electronics Forum | Tue Jul 06 18:31:22 EDT 2004 | Raul
I would like to know what purity is required for wave soldering process, I am doing an evaluation of buying/refilling tanks or installing a Membrane Nitrogen Generator. the generatos exist from 95% to 99.7% purity, does any one has done any analysis
Electronics Forum | Wed Aug 14 07:00:42 EDT 2019 | ameenullakhan
What should be the ideal Purity level of Nitrogen at incoming stage ?? Please suggest. Regards, Ameen
