Electronics Forum | Thu Mar 09 16:56:19 EST 2000 | Dave F
Ashok: If I was to count, I'd guess there was more than 4 subquestions. Hey, but who's countin' anyway? I have answer (s) "on ESD all related to use of wood in a typical PCB Assembly line:" Before pushing-on, it is only "a typical PCB Assembly li
Electronics Forum | Thu Mar 09 16:56:19 EST 2000 | Dave F
Ashok: If I was to count, I'd guess there was more than 4 subquestions. Hey, but who's countin' anyway? I have answer (s) "on ESD all related to use of wood in a typical PCB Assembly line:" Before pushing-on, it is only "a typical PCB Assembly li
Electronics Forum | Wed Jun 24 08:28:16 EDT 2020 | pickplace
Hi Jacobo, it would be importatn to know what kind of error the machine is displaying. Are the chips in paper or plasic tape? Did you check pickup coordinates and hight? Have you many false edge pick vision errors? Then I would switch off the tombest
Electronics Forum | Wed Aug 21 18:13:21 EDT 2002 | johnlee
Kevin, There are a number of custom integrated systems that perform automated insertion of "odd" components. These system use either a robot or cantilevered X,Y,Z Cartesian motion systems. Our systems have accepted standard and custom component feede
Electronics Forum | Thu Mar 14 23:20:05 EST 2002 | alanwilson
Missing and misplaced components could be down to board supports set too high or too low. Check the ZO and make sure the deflection is set ok at various points across the board. Check the other usuals such as sticking nozzles, correct size nozzle for
Electronics Forum | Wed Jul 30 11:11:11 EDT 2003 | Roger
Has anyone changed the PD on this part lately. Sounds like a program (PD) issue. Nozzle size should be .7mm. Narrow view should be selected. Tape leaf cover on feeder should be .7mm. Make sure parts aren't on the camera lens. Good luck!
Electronics Forum | Thu Sep 29 05:37:56 EDT 2005 | dougs
for 0402's you should be able to run the turret at full speed, if you need to slow it down it means that your machine isn't set up properly. use the vision number that the manual tells you and make sure your feeders are properly calibrated, poorly c
Electronics Forum | Fri Feb 22 10:46:04 EST 2008 | mulder0990
Yes, we have. We do have one machine that can place the 0201 parts. I have bought some 0.4mm tape leaf covers and replaced the 0.7mm covers on some CP6 0802 feeders. I calibrate the feeders as tight as I can and make sure the feeders that we use a
| 1 |
