Electronics Forum | Mon Jun 19 08:49:40 EDT 2017 | westshoredesign
Just buy a separate machine to apply paste. You'll be able to run faster, (by doing more at the same time) and you can probably find an air-over-syringe system for less than $2000USD. At the end of the day, that's probably less than you'll spend in t
Electronics Forum | Tue May 31 15:03:31 EDT 2011 | gosswald
The complete model number is QSA-30. Thanks
Electronics Forum | Sat Aug 22 16:53:32 EDT 2020 | jmelson
I'm trying to diagnose a Quad QSA-30A machine that won't go ready. I have the machine technical drawings, they have overall machine schematics and cable wiring on most of the cables, but that's all. Does anyone have access to the schematics of the
Electronics Forum | Wed Jun 01 10:02:56 EDT 2011 | bobpan
Those cards are all different. The c-series stands alone by itself while a qsp2 and qsa-30 mount into a slot. They were all manufactured seperately for each machine. I would purchase a new refurbished one for the 2c machine and forget about the other
Electronics Forum | Tue May 31 15:29:09 EDT 2011 | leemeyer
I have a QSP-2 which I assume is in the same family as the QSA-30. I compared the diagram that is in the service manual with a board from a 2-C and they appear to be the same. Your best bet would be to contact PPM at http://www.goppm.com. They shoul
Electronics Forum | Thu Mar 18 20:27:57 EST 1999 | Jim Muckle
| | | I'm in the process of selecting a medium speed pick & place machine. I need to place a wide range of components from 0805 | | | chips to a 144 pin MQFP (32mm square 25mil lead spacing). | | | | | | Anyway, I'm looking at the Quad QSA-30, the
Electronics Forum | Tue Sep 03 05:39:44 EDT 2013 | bobpan
Yes you can upload modcodes from assembler. This works for all quad c-series machines along with some others. I would NOT overwrite anything. I would save them to a new file so you have the originals. Your original modcodes are good.....your machine
Electronics Forum | Tue Sep 15 02:17:37 EDT 1998 | Doug Kester
| We are a small contract assembly shop hand placing SMT. We recently received a large contract for SMD that will require placement rates of at least 6,000 CPH. I am looking at Fuji, Mydata, Quad, and Zevatech. I have little experience with automated
Electronics Forum | Thu Jan 07 12:32:41 EST 2016 | unisoft
> Unisoft ProntoPLACE software ( http://www.unisoft-cim.com/pcbplace.htm ) >> ProntoPLACE programs popular surface mount (SMT) placement, through-hole (THT) insertion and glue dispensing machines. Universal, Fuji, Mydata, Siemens, Panasonic, Assembl
Electronics Forum | Thu Jan 07 12:30:32 EST 2016 | unisoft
> Unisoft ProntoPLACE software ( http://www.unisoft-cim.com/pcbplace.htm ) >> ProntoPLACE programs popular surface mount (SMT) placement, through-hole (THT) insertion and glue dispensing machines. Universal, Fuji, Mydata, Siemens, Panasonic, Assembl
.gif)
