Electronics Forum | Sun May 20 23:15:34 EDT 2007 | dsd
George, The Radiator is only used on the older Nitrogen ready type Heller Ovens to attract the flux toward the Flux Filtration system. There should be two blowers in the Cooling zone where the radiator is to be fitted and there should be 4" ducting
Electronics Forum | Tue Jan 27 14:29:54 EST 1998 | Charles Czerwinski
Hello there, Wondering if someone out there can help. I have an electronics package housed in aluminum that needs to resist 100K rad of radiation. Any suggestions on how to tackle this? Thanks in advance. Charles
Electronics Forum | Tue Sep 09 06:57:52 EDT 2003 | cyber_wolf
Yes I have cleaned the nitrogen knives out, and I have a chiller hooked to the heat exchanger(radiator).I am starting to think that I need to replace the radiator with another blower...??? Thanks for the input. Regards, Sr.
Electronics Forum | Thu Jan 11 11:52:19 EST 2007 | Megan
Is there anyone that knows what kind of radiation meter to use on a CRX-2000, X-ray machine?
Electronics Forum | Mon Nov 19 10:18:03 EST 2001 | gzweig
There is no question but that x-radiation is an ionizing radiation and can effect components sensitive to ionization . The higher the power level of the x-ray source, the higher the amount of ionization taking place. At low levels of x-ray we have ne
Electronics Forum | Fri Jan 12 08:19:45 EST 2007 | davef
Radiation survey meters: * http://www.google.com/search?sourceid=navclient&ie=UTF-8&rls=GGLC,GGLC:1969-53,GGLC:en&q=Radiation+Survey+Meters+ * http://www.glenbrooktech.com/radsafety.htm We have no relationship, nor receive benefit from the company
Electronics Forum | Fri Jan 12 09:04:18 EST 2007 | Cal
For insurance purposes we verification... Here is a snippet from Glenbrooks website. From http://www.glenbrooktech.com Design Safety Standards The design safety standards pertaining to Industrial X-ray Inspection Systems can be found in "Code of
Electronics Forum | Fri May 18 07:50:05 EDT 2007 | georgeiii
Hi All! I have a reflow owen Heller 1800W. I have a problem with it - din't work a cooling zone. There isn't radiator - can anybody send me a photo of this radiator and where I can find it ? Pump is not connected - I don't have a electric schematic f
Electronics Forum | Sat Jan 18 03:18:04 EST 2014 | smtspareparts
Should be too high temperature on somewehere on machine, 1 Check cooling oil tank, If the cooling oil need replaced? Check the radiator of cooling tank, withdraw the filtering net and clean it,and clean the dust off the radiator of cooling tank wi
Electronics Forum | Mon Jun 18 18:13:22 EDT 2001 | davef
Would comment extensively on the following? The xray equipment vendors have told me that xray tubes that are less than 100kV have a very low probability of damaging components. Note the "very low probability" statement - they have not seen any custo
