Electronics Forum | Thu Jan 08 11:06:40 EST 2004 | russ
If I read this correctly you have two identical ovens that were setup the same ie zone temps, fan speeds etc... when you ran the same board through each of them one showed a lower board temp. Is this correct? Is the temp of the board 7 deg. lower t
Electronics Forum | Sat Dec 17 08:25:13 EST 2005 | grantp
Hi, Yes, I was talking about the oven, but then thinking about Soltec in general and about things the software really should be able to do, got me worked up on the Deltawave. I guess the frustration with it's software is not far from the surface.
Electronics Forum | Tue Jul 16 02:18:42 EDT 2019 | sy332366
Specifications : S-8800 Number Of Heating Zones :Up8/Bottom8 Dimension (L*W*H)mm: 5310x1353x1490 Dimension (L*W*H)mm: 5310x1353x1490 Number Of Heating Zones : Up8/Bottom8 Length Of Heating Zones : 3121mm Control System : PLC+Computer Transmission Age
Electronics Forum | Wed Sep 22 19:10:39 EDT 2004 | Rush Fan
I was wondering if anyone has ever considered measuring the belt speed of their reflow ovens using some type of hand-held, preferably non-contact device? If so, could you recommend a manufacturer of such a device? We are considering measuring our act
Electronics Forum | Thu Dec 14 04:42:11 EST 2017 | jineshjpr
Can anybody suggest how can I achieve good solderability in convectional reflow oven If I reduced Convection Air Speed 80%. The whole purpose is to reduce 0402 LED tilting in the convectional reflow and the PCB having QFN with 60 to 120 sec soak, 30
Electronics Forum | Thu Dec 14 05:07:55 EST 2017 | tsvetan
picture of the problem would help people to speculate what you do wrong
Electronics Forum | Thu Dec 14 15:05:17 EST 2017 | emeto
I am pretty sure, you are looking into the wrong spot. Your paste is too much, or your part has very inconsistent narrow leads(that includes wrong pad design as well.)
Electronics Forum | Wed Dec 20 07:16:16 EST 2017 | stephendo
I agree with Evtimov. What he didn't point out is that the surface tension of the solder would vastly overwhelm any force from air flow.
Electronics Forum | Wed Jan 07 13:17:56 EST 2004 | James
We currently have 2 HVA 102 conceptronic reflow ovens. I ran 2 profiles on the 2 seperate machines. One of the oven ran 7 degrees lower than the other oven. I checked all the fans and they seem to running fine. I get no warning on the monitors.
Electronics Forum | Thu Apr 11 15:07:31 EDT 2019 | reckless
I also am a huge fan of Universal Machines for their reliability, capability and dependability. Very highly engineered machines. Only machine I hear better than them is Fuji. Apple and Motorola used Universal's extensively so it tells you how re
