Electronics Forum | Tue Jul 28 17:37:00 EDT 1998 | Robert Steltman
| Here is what I would do faced with your problem. First I would profile a similar board or use an existing profile. From there I would place the dummy device on the surface of a sample board with a thin thermocouple soldered to the board surface und
Electronics Forum | Tue Jul 28 02:22:59 EDT 1998 | Bob Willis
Here is what I would do faced with your problem. First I would profile a similar board or use an existing profile. From there I would place the dummy device on the surface of a sample board with a thin thermocouple soldered to the board surface under
Electronics Forum | Thu Sep 12 09:15:29 EDT 2002 | mhoughton
I have printed and placed similar devices in high volume with exactly this spec for a couple of years with no problems, are you using laser cut stencils and what type of solder paste are you using? and what is the end use of the product as it may nee
Electronics Forum | Wed Apr 21 11:33:20 EDT 2004 | tigerlordgm
As one of our small batch processes, we place BGAs on PCB without using solder paste. We apply tacky flux to a predetermined height on a pallet, "dip" the BGA into the tacky flux to wet the solder balls to the set height, and then use a BGA rework st
Electronics Forum | Fri Jun 06 07:23:18 EDT 2003 | johnw
Hi Kevin, the profile doesn't actually qualify something as lead free or not it's purely the Pb content of the assembly that does this. Currently the understanding of the limitations of the lead in the jont is 0.1% by weight or less. So as long as y
Electronics Forum | Fri Aug 20 12:06:55 EDT 2004 | danhui888
Pls contact ECD for built in monitoring system or KIC 24/7. This products will monitor your oven performance and profile round the clock without stopping. If your profile is out of the spec, the software will gives you an alarm and the machine will s
Electronics Forum | Fri Aug 20 12:06:53 EDT 2004 | danhui888
Pls contact ECD for built in monitoring system or KIC 24/7. This products will monitor your oven performance and profile round the clock without stopping. If your profile is out of the spec, the software will gives you an alarm and the machine will s
Electronics Forum | Mon Aug 16 20:22:54 EDT 2004 | Grant
Hi, Thanks for the info! In the software can you add solder paste specs and heat sensitive components and see where the profile sits against these fast? Measurement is the easiest part I think, but what I thinks harder is good software to analyze th
Electronics Forum | Fri Aug 15 16:00:53 EDT 2003 | Cameron
Take a look at the product here: http://www.kicthermal.com/products/KIC-Auto-Focus.pdf KIC uses a previously profiled product library to calculate in spec reflow profiles for new products. Just enter you dimensions and if finds a solution for you.
Electronics Forum | Tue May 20 06:00:33 EDT 2008 | roc2x
Im qualifying a new PCB. I run 2 diff supplier. Supplier A has Zero failure. Supplier B has 4 failure all having Lifted PAD on Bga same location and same location pads that lifted. How can I prove that the PCB have problem? Input : Both run in same o