Electronics Forum | Wed Apr 27 23:23:18 EDT 2005 | pdeuel
It was a resonant frequency that brought down the Narrows bridge. Memorex can shatter a wine glass with resonance. Ultrasonic washers use frequency to do what they do. If anything on the pcb has a length width or mass that resonates at the washers fr
Electronics Forum | Fri Jan 12 10:25:03 EST 2001 | John Litva
Thanks for the info Patric...! Using that I found the resonator on the Manu's website. Armed with that and info I recvd on the PIC, I jumpered across the resonator and the board now functions. We'll be testing tonight with the Heli and see how it
Electronics Forum | Fri Jan 22 11:03:46 EST 1999 | TODD ROBINSON
WE ARE USING A SMT CERAMIC RESONATOR ON A COUPLE OF OUR BOARDS AND THEY ARE CAUSING FAILURES, DUE TO UNCLEANLINESS UNDER THE PART. WE NEED A WAY TO STAND THIS PART UP OFF OF THE BOARDS, OR IF ANYONE CAN SUGGEST ANOTHER WAY AROUND THIS? THANK YOU, TO
Electronics Forum | Fri May 27 08:11:27 EDT 2005 | Joris Groot Koerkamp
I have a problem with a Murata cap chip type resonator(ROHS). After the reflow process, the soldering joints flow to one side of the component. I did not have this problem with the leaded component. Did someone have a solution for this problem?
Electronics Forum | Tue Nov 01 10:48:24 EST 2005 | Rob
Can't say too much about the solder joints issue, but about a decade ago we did have a lot of problems with resonators being damaged by harmonics from Ultrasonic board washing & Ultrasonic welding. However this mostly manifested itself as cracking i
Electronics Forum | Fri Jan 05 05:19:22 EST 2001 | Patric.J
Hello John.L I�ll think it is an Ceramic Resonator,The manufacturer might be Murata.
Electronics Forum | Fri May 27 10:25:49 EDT 2005 | Joris Groot Koerkamp
Hi Rob, The packagetype is: 2) CSTCC KR Joris
Electronics Forum | Tue May 31 04:36:15 EDT 2005 | Rob
Do all of your PCBs come from the same supplier & are they HASL?
Electronics Forum | Tue May 31 05:53:02 EDT 2005 | Joris Groot Koerkamp
Hi Rob, Yes all PCBs come frome the same supplier and are HASL. KR Joris
Electronics Forum | Tue May 31 05:55:35 EDT 2005 | Rob
Hi Joris, What is the surface finish like - is it pooled to one side of the pad? Cheers, Rob.
