Electronics Forum | Mon Nov 09 07:21:02 EST 2009 | CL
Good Morning, I have seen many posts regarding BGA voiding being excessive and what can be done to better the condition. I have a customer that has an assembly that we have had a diufficult time with. We have spent a lot of time debugging the proces
Electronics Forum | Wed Jun 11 16:30:33 EDT 2003 | T.Vick
You have received some great feedback so far. I would like to summarize and add a few points regarding maintenance. You should start (as recommended already) by verifying your component library data. Using the default values from the master library i
Electronics Forum | Wed May 21 04:50:51 EDT 2008 | aj
Hi all, We had similar problems a while back. Boards would fail at test but if you applied pressure to the BGA they would pass. Turned out that during the PTH assembly process the Operators were flexing the cards during the insertion of an Oupin C
Electronics Forum | Mon Jun 16 12:06:52 EDT 2008 | realchunks
Seen this with our old board house. The uncured board is causing your problem. Hard to catch, but looks like you have all your ducks in a row. We presented the exact same thing to our board house, and naturally they blamed our process, handling, a
Electronics Forum | Tue May 20 17:09:13 EDT 2008 | davef
Sorry, we didn't do a good job of understanding your question. For more on delamination, look here: http://www.smtnet.com/Forums/Index.cfm?CFApp=1&Message_ID=54655 ... but we're not so sure that this is a straight delamination issue, because: * One
Electronics Forum | Mon Nov 06 10:29:28 EST 2000 | Dean Stadem
All of the replies have merit. Here is another one. Because the cause of the tombstoning is wetting forces that are imbalanced, and one end wets faster or more readily than the other, the 0402 lifts up on that end easily because of its low mass. Incr
Electronics Forum | Wed Feb 07 13:44:09 EST 2007 | dsoohoo
After some precursory experimentation, I am planing on employing a form of low melting temp solder for use in reworking some very dense, copper core PCB's, both SMT and THT, which were originally mounted with 63/37 solder. The main problem with the
Electronics Forum | Fri Aug 07 01:02:51 EDT 1998 | zeek - just wanna to get a word in here
| | I am looking for advice or information from anyone about the possible reliability problems associated with epoxy on solder pads of discrete devices. Will the epoxy expand and lift over time, Will there be adverse reaction between the solder and t
Electronics Forum | Thu Mar 25 09:14:09 EDT 2010 | krish_bala
Hello, I have been having some troubling issues when it has come to BGA Placement and I was hoping if there have been others who have been able to resolve similar issues. We are curently doing reworks on a variety of BGA, but seem to be having issu
Electronics Forum | Thu Aug 06 09:51:20 EDT 1998 | Bob Willis
This text may be of interest to any one with tin lead spots Guide to Solder Spots - A New Plague in Manufacture ? So what are solder spots ? They appear to be the next big problem in modern reflow assembly in fact in any process that involves solder
1 |