Electronics Forum | Fri Dec 07 14:46:54 EST 2007 | mpolak
i know but i would like to know roughly what temperatures people using
Electronics Forum | Thu Sep 18 12:52:08 EDT 2014 | steveO
Does anyone know a rough price estimate on a new nitrogen reflow oven that can achieve very low oxygen levels - around 10PPM. Compared to a similar standard nitrogen oven that would for example go down to 500 PPM, what is a rough price premium for a
Electronics Forum | Fri Nov 07 03:46:09 EST 2014 | philc
Just wondering why you need to scuff the surface at all, as a decent glue should take to the PCB material anyway. However, it may be a customer requirement, so you have to do it. Have you thought about getting the PCB's made with a rough surface wh
Electronics Forum | Tue Apr 05 18:50:00 EDT 2016 | bootstrap
Roughly what is the price of the Essemtec Scorpion? Is that capable of applying solder paste for 0201 discrete components and 0.40mm to 0.50mm pitch BGAs? Also, what is the difference between my500 and my600? Are both currently made models? And r
Electronics Forum | Mon Jun 18 19:49:45 EDT 2001 | Gil Zweig
To best visualize the factors effecting resolution, carry in your minds eye an image of a light shadow being cast on the wall using a flashlight. The size of the flashlight filament would be the analagous x-ray "focal spot" The smoothness and/or roug
Electronics Forum | Mon Jun 05 14:17:18 EDT 2000 | C.K.
Dream: Yes, VIA's are connected to actual SMD pads via traces - roughly .030" from the pad. The VIA is .013" in diameter, and the excess solder bleeds out of the actual VIA barrel after the 1st reflow.... -CK
Electronics Forum | Wed Mar 14 17:26:03 EST 2001 | davef
Most $$-value stuff is dependant on the cost structure of the company. Why not do a small cost study to measure the amount of time your improvements save? Folk in accounting should be able to "rough price" the $$ benefit of your efforts.
Electronics Forum | Mon Dec 06 00:31:49 EST 1999 | Jeorge
How to calculate CPk of a chip shooter or a pick and place machine? And what's the right CPk? Want to have a rough understanding about CPk.
Electronics Forum | Mon Jan 11 16:16:52 EST 1999 | Jenna Sweterlitsch
This question is directed to anyone having eperience with Sn62Pb36Ag2 solder balls for BGA's. Have you seen anything like a rough, raisin-like surface texture after ball attach? If so, what did you do about it? Thanks!
Electronics Forum | Thu Dec 19 13:23:11 EST 2002 | gramsey
Now, this is good solid advice. If following this advice does not help there is something wrong with 1. the paste (reology failure) 2. the stencil (rough walls) 3. the board (bad design or fab) (in order of likelyhood)