Electronics Forum | Mon Jan 03 05:34:16 EST 2011 | jmw
Check in you system configuration that you dont have the opiton to use a matrix tray handler turned on. This is what i have seen cause this problem.
Electronics Forum | Fri Dec 31 12:26:29 EST 2010 | kvael
Has any one had this problem? Dynatech says it is the I/O Dpram board, sold me one that dosen't work. Bought a second Dpram from SMTBOX, still have the same original problem. During Dpram initialization error comes up "no command response from handl
Electronics Forum | Mon Dec 13 11:27:39 EST 2010 | kvael
I have a Samsung CP30V machine that when starting up gives me the error "NO COMMAND RESPONSE FROM HANDLER". Has anyone had this problem. I have replaced the I/O Dpram board, no change.
Electronics Forum | Fri Jan 07 15:09:09 EST 2011 | brianangus
Hi. Check the 5V PSU supplying the VME rack. Make sure you have 5V and not something like 3v. try removing the ISA card from the PC and try a different ISA slot in the pc. Hope this helps. Brian.
Electronics Forum | Mon Jan 18 12:03:37 EST 2016 | rfm2nd
would anyone possibly have the calibration jigs to be used in calibrating the cp-45 and/or the cp-60 machines from Samsung?
Electronics Forum | Mon Jan 18 12:04:24 EST 2016 | rfm2nd
would anyone possibly have the calibration jigs to be used in calibrating the cp-45 and/or the cp-60 machines from Samsung?
Electronics Forum | Sat Jan 23 05:21:09 EST 2016 | spectrumsmt
Hi Rick, we sell a very good after market recalibration jig which is available to calibrate most makes including Samsung. We also sell nozzles and feeders! Please get in touch or have a look at the website spectrumsmt.com All the best Ian
Electronics Forum | Mon Feb 18 08:11:27 EST 2019 | tomazicrok3
hello i have samsung cp40cv and this errors comes up can someone help me. vision communication error(1000)(1000), no sequence-finished from handler(%1), no command response from handler (0x2002).
Electronics Forum | Tue Feb 19 02:03:51 EST 2019 | bukas
try first to replace SYS folder, or one by one of its files. if that doesnt work you are looking at complete disk backup. and check disk for bad sectors ofc
Electronics Forum | Mon Feb 18 09:49:43 EST 2019 | bobpan
This is going from my memory from a long time ago...but in the scp.ini file....there could be digital light control and/or a matrix tray handler setting. I would turn them off if they are on. I believe this has something to do with a system setting.
winsouce.jpg)