Electronics Forum | Thu Jul 16 22:02:01 EDT 2009 | tpappano
The manual says (paraphrasing) "If the ball screw needs lubrication, lubricate the ball screw". Not very helpful 8-) The various linear guides all have grease fittings, but I can not find any for the ball screws. Any advice from CSM84 users woul
Electronics Forum | Wed Jul 29 02:53:09 EDT 2009 | meritajs
You could use SHELL ALVANIA GREASE EP2 or other vehicles solid greases
Electronics Forum | Thu Jul 14 03:16:18 EDT 2022 | acouto
Thanks for the feedback, I've been having some problems with the motor overload in the conveyor and central reel whenever there is cleaning by the external company. After analyzing I always find talcum powder and lubricant (it looks like cement) on t
Electronics Forum | Tue Dec 01 14:47:57 EST 2009 | kjs123p
I am wondering what other Conceptronic users are using to oil the chain, lubricate the lead screw, and the grease used on the chain drives. I have contacted Conceptronic, and they gave me recommendations, but I am having trouble contacting them. Than
Electronics Forum | Mon Jul 03 03:15:35 EDT 2006 | bvdb
Thanks in part to help from the good people in this forum we've got our 1989 Fuji IP-1 working really great! We can run for hours without missing a beat (except to replace empty reels). Although I'm careful to lubricate as per the instructions the
Electronics Forum | Fri Aug 11 08:34:36 EDT 2006 | SuMoTe
You need to find out what Speedline recomends for lubrication and use it (chain oil and screw shafts). Don't try to be clever or cheap by second sourcing your own concoction. Currently I am using: Tribol for the chain Krytox for the screw shaft
Electronics Forum | Fri Jul 18 10:10:21 EDT 2014 | proceng1
We've got an MPM Accuflex printer that generally works great, but we've had a recurring problem. The powered rail (rear rail) fails to initialize. Sometimes all it takes is restarting the machine to get it to work. At the suggestion of the repair
Electronics Forum | Fri Jul 25 10:11:36 EDT 2014 | cgreiner
We also had this problem and found similar results with the anti-backlash nuts binding. We went through the process of cleaning the lead screws and the nuts which resolved the problem for about 6 months only to have it return. We learned that the
Electronics Forum | Fri Jul 25 10:13:01 EDT 2014 | cgreiner
We also had this problem and found similar results with the anti-backlash nuts binding. We went through the process of cleaning the lead screws and the nuts which resolved the problem for about 6 months only to have it return. We learned that the
Electronics Forum | Wed Jul 05 02:56:25 EDT 2006 | bvdb
Thanks Grant and Doug, The manuals never tell you that you can pull the leadscrew covers back - but thanks to your suggestion I was able to access the lead-screw. It didn't look bad at all and had some lubrication on it. I added some more lubricat
winsouce.jpg)
