Electronics Forum | Thu Apr 15 16:33:40 EDT 2004 | wgaffubar
We never really use to calibrate the thermocouples on our reflow oven or wave solder systems, but we did disconnect the T/C's and input a calibration standard to check that the computer cards were correctly reading the proper temperature for a given
Electronics Forum | Thu Apr 15 20:41:22 EDT 2004 | Ken
There are ledgitimate reasons for checking furnace calibrations, but let me clarify what that is. 1. TC's are not necessarily calibrted. Not unless you need "absolute" accuracy. TC's operate against a (non-linear) standard +/- a tolerance. Most
Electronics Forum | Fri Oct 27 09:42:12 EDT 2000 | Daniel Carlsson
I wonder if anyone have experience from using a fairly new reflow oven and would like to share your toughts (advantages or disadvantages) with me. I�m especially interested in: Conceptronic, Electrovert, ERSA, Heller, Quad, Rehm, Seho, SMT or Vitroni
Electronics Forum | Fri Sep 24 07:31:13 EDT 2021 | mun4o
Hi all, our company planning to buy a new /third/ smd line.I have choose P&P ,and solder paste printer , but I hesitate about reflow oven.Now we have two smd lines.The first oven is a old ersa hotfow5 - very robust machine. The second reflow oven is
Electronics Forum | Sun Feb 07 10:41:16 EST 2010 | davef
Makes us wonder how well the connections on the component match with the pads on the board.
Electronics Forum | Mon Jun 10 05:05:33 EDT 2019 | pcbconnectchina
Hello! Don, I heard from SMT factory that the fixture for oven they use is durostone material, I don't if durostone is correct name translated, it is synthetic stone made of carbon fiber sheet. Best Regards Clare PCB Connect China
Electronics Forum | Sun Feb 07 11:56:05 EST 2010 | mystkldy
Makes us wonder how well the connections on the > component match with the pads on the board. The pads are actually larger than the leads on the part, but I think we may have figured it out. We believe the conveyor vibration is causing it. When we
Electronics Forum | Wed Aug 14 11:34:24 EDT 2002 | carln
Is your exhaust duct connected to a reflow oven that is used for flux? The condensate may be carring over from another oven that shares the same duct.
Electronics Forum | Sat Sep 22 09:07:56 EDT 2001 | davef
Back-stepping a bit. If a profile is being used to: * Set-up the oven for a new product or trouble-shooting process, the profile should be taken with a solid contact to a solder connection. * Monitoring on-going stable and in-control process that re
Electronics Forum | Tue Feb 19 12:28:26 EST 2019 | slthomas
Presumably you're talking about lead free, but you don't say. Heller can probably provide you with a starting point, as rob has already pointed out, but you do need to develop the capability to perform profiling yourself. That oven should have ECD
