Electronics Forum | Tue Apr 09 22:19:38 EDT 2019 | d_nguyen2018
Thank you, Alex!
Electronics Forum | Tue Apr 09 21:57:42 EDT 2019 | alexvolovich
If you were able to do a first/last part, then your tray wagon is set-up. You need to go to Tray Types and program the tray that will match the piece of tape you have. Then you should be able to add your component to the tray wagon.
Electronics Forum | Sun Apr 07 00:45:21 EDT 2019 | d_nguyen2018
Hi, Can you show me how to set up tray table? I have 1 x 10 pockets tape with 10 PQFPs. I went into Magazines then selected Tray Wagon. I did first and last part on the 1 x 10 tape pockets but it did not work. I was told that I must set up the tray
Electronics Forum | Tue Mar 02 22:40:52 EST 2004 | pdeuel
To clean up other replys I will add that some most all machines have global correction. Most placements are an off sets from pcb 0,0 usually the lower left corner of the board. When the machine locates the fiduitals and these fids are not exactly whe
Electronics Forum | Wed May 22 08:26:28 EDT 2002 | cyber_wolf
Mydata uses fiducials on their feeders. I am not sure whether or not your are familiar with Mydata feeders, but its pretty basic. The feeders are actually magazines made up of multiple individual feeders. Example: There are 16 8mm feeders in (one)8mm
Electronics Forum | Wed May 22 10:27:33 EDT 2002 | stefwitt
Fiducial recognition on the Siemens machine works like the Mydata. Once you select this option, fiducials will be recognized when a new program is send. You can also select recognition as part of the feeder refill function mode. There is no automatic
Electronics Forum | Tue Mar 09 14:29:40 EST 1999 | Jason Hall
When a board has loaded into the machine and the fiducials do not line up I have tried to use mark edit to set an offset into the program. I lined up the crosshairs and set the data. For some reason the machine did not accept this info. Does anyone h
Electronics Forum | Thu Dec 11 00:00:22 EST 2003 | david2002
Does anybody have the measurements for the dimensions of the CyberSentry fiducial calibration board. This is a board used to set the machine up if paramter files are lost. Our board has gone missing and cyber optics has a long lead time. We can easil
Electronics Forum | Tue Mar 09 21:22:59 EST 1999 | Dean
| When a board has loaded into the machine and the fiducials do not line up I have tried to use mark edit to set an offset into the program. I lined up the crosshairs and set the data. For some reason the machine did not accept this info. Does any
Electronics Forum | Mon Feb 12 09:44:47 EST 2007 | SWAG
Enhanced board set-up, set conveyor width, load board, (your fiducials must be accurate!), use two fiducials to set reference point, click on placement(s), move crosshair to centerpoint, use two point teach to teach one point in the center or use cor
COT specializes in high quality SMT nozzles and consumables for pick and place machines. We provide special engineering design service of custom nozzles for those unique and odd components.
2481 Hilton Drive
Gainesville, GA USA
Phone: (770) 538-0411
