Electronics Forum | Tue Nov 30 15:38:27 EST 1999 | Wendy Casker
Hi, I am looking for land patterns for 0612 and 0508 chip capacitors. Because they are not standard (yet) package sizes, i am having trouble finding a standard land pattern. (If you don't know what these are, picture a 1206 or an 0805 with the te
Electronics Forum | Tue Oct 02 07:23:37 EDT 2001 | cath
Has anyone caried out a DPM analysis on these components. I would be interested to know the defect rates and other assoc. placement issues as we have never placed them before. Thanks, cath
Electronics Forum | Tue May 07 07:55:33 EDT 2002 | Sir Alexandr
Our SMTproduction has next troubles : 1. irregular 0603-components in tapes (different solder shapes) makes vision errors on placement devices 2. big solder amounts makes pickup and placing errors 3. some tapes delivery delays , so production halts f
Electronics Forum | Thu Sep 11 23:50:51 EDT 2003 | Dean
Epoxy is hydroscopic. A cavity will form when the cure furnace reaches the boiling point of water. The steam expansion creates the pocket. It can be large enough to be filled with molten solder from the wave machine and cause a hard short under th
Electronics Forum | Mon Nov 25 09:45:29 EST 2013 | processman
Are you using zestron corrision inhibiter Ci20 also?
Electronics Forum | Wed Nov 27 06:06:59 EST 2013 | luciano
Thanks!
Electronics Forum | Fri Dec 06 06:02:25 EST 2013 | luciano
Thanks for the advice!
Electronics Forum | Tue Jan 29 16:54:17 EST 2019 | slthomas
There's always flying probe, although it's not particularly cheap.
Electronics Forum | Thu Nov 21 11:10:07 EST 2013 | luciano
Hello, We've just started using VIGON A200 in our Aqueous Trident XLD system and observed that aluminium electrolytic capacitors get corroded. Concentration was set at 20% and washing is done by spray at 150F for 6 to 8 minutes. Then is rinsed seve
Electronics Forum | Tue Jan 29 20:33:52 EST 2019 | deanm
First, you cannot measure capacitors once they are soldered onto the board. Second, why must you measure? Verify your machine set up by using intelligent feeders (if your machine has them) or a checklist, preferably by two people. If you cannot trus
