Electronics Forum | Fri Aug 03 12:13:59 EDT 2001 | hinerman
T.A. board lok is fixed tooling. I have not used it, and therefore cannot comment on it. Their website describes it in detail for those interested. -The Grid-Lok system is completely pnuematic -Each pin locks individually via mechanical lock -Each
Electronics Forum | Fri Nov 18 14:19:31 EST 2005 | bk
Well my problem wound up being the intel modem cards Mydata started using. They got a hold of some of the old 3 com modem cards and my problem went away completely. It happened on all my machines using these cards.My one machine which had the old car
Electronics Forum | Tue Mar 16 17:06:28 EST 1999 | GSM GURU!
We are dealing with down time accredited to the Pumps getting clogged with dried glue. We have decided to purge all spindles at 6 hour intervals. We are looking at making this process automated. Has anybody tried this and if so, is there a way to set
Electronics Forum | Thu Sep 20 13:28:23 EDT 2001 | ohanlon
Here is how the FormFlex system conforms to component variations. The FormFlex system utilizes an oil chamber that is common to ALL the pins once the system is set. Pushing down one pin will cause the displaced oil to be shared by all the others pins
Electronics Forum | Wed Sep 19 09:34:08 EDT 2001 | jschake
Both FormFlex and Grid-lok tooling systems are marketed as compliant tooling systems. Both are able to conform to the variations of the topography on the bottomside of a substrate to provide full support during printing of 2nd side assembly. The ba
Electronics Forum | Mon Jul 30 12:14:00 EDT 2001 | hinerman
1. The grid-lok technology affords itself the flexibility to come in a variety of heights. The list of machines given are customers we are working with currently. Please contact me offline at jhinerman@ovationproducts.net if you have a specific app
Electronics Forum | Tue Dec 03 07:57:27 EST 2002 | pjc
Price of DEK 248 and MPM UP100 are about the same, $22-36K range. MPM UP100 has programmable squeegee pressure. Precise, repeatable results with less operator involvement. Pressure parameters saved in board program file. DEK 248 has manual microm
Electronics Forum | Wed Oct 29 13:00:27 EDT 2014 | Todd Grover
We have a Cencorp TR1000 Router that has been recently having problems. Frequently it will freeze up. This usually happens after running it for awhile. Sometimes the machine and computer both freeze up. When this occurs we have to completely shu
Electronics Forum | Thu Aug 12 22:31:10 EDT 1999 | Dave F
| Hello, | | Can any netters suggest what critical parameters should be considered & what are there assoicated impacts for a solder paste printing process ... | | B.Regards, | Felix | Felix: There are some 30 variables that affect SMT solder qua
Electronics Forum | Mon Sep 06 08:05:51 EDT 1999 | stefano bolleri
| We are using some Fuji machines and have trouble picking parts up from damaged or mis-adjusted feeders. When I was working with Panasonic machines I was able to buy a feeder alignment jig from them to align the pick spot in the feeder, but Fuji doe