Electronics Forum | Thu Feb 14 11:09:36 EST 2008 | soudomphong
I am looking for the cheapest 904 Siemens nozzle. Anyone that know where to get them please advise, thank you,
Electronics Forum | Mon Jul 26 17:54:41 EDT 2004 | Jeff
Sounds to me like a nozzle changer issue; broken garages or needs to be calibrated?
Electronics Forum | Thu Jul 22 05:43:56 EDT 2004 | jbtech
Can some one explain to me why the ceramic nozzles are cracking not on the tip but on the base??? also how long do the sleeves last, no informaton from siemens they just came in and changed from 'o'ring to bearing type?? Thanks Julie
Electronics Forum | Thu Jul 22 06:08:18 EDT 2004 | hitechsc
Hi julie I found that it was the sleeve on the ball bearing that was the fault we went back to the oring type problem gone.
Electronics Forum | Wed Jan 28 15:35:47 EST 1998 | Tommy Turner
| We have some trouble adding a IC head Nozzle to a | Siemens Siplace machine. | It seems like the machine don't want to recieve | new MA data, coz even if we restart the line | the old nozzle configuration will be used. | Anyone know what we do wron
Electronics Forum | Tue Jan 27 09:11:05 EST 1998 | Stefan Andersson
We have some trouble adding a IC head Nozzle to a Siemens Siplace machine. It seems like the machine don't want to recieve new MA data, coz even if we restart the line the old nozzle configuration will be used. Anyone know what we do wrong ? ________
Electronics Forum | Wed Dec 12 15:00:43 EST 2007 | mefunak
Hi,everybody! There is an interesting things happened with the 0402 components- machine Siemens HF3,it's an Emergency Stop error message " Component not at nozzle before placement" and there is a chance to find an extra components lying in a mess on
Electronics Forum | Thu Dec 13 16:22:15 EST 2007 | mefunak
Thank you,LLOYD,for your response,all your prepositions will be checked. And about switching machine on and off, I absolutely agree with you, it's the perfect cure for Siemens))) But,a strange thing happened,we changed a head,that started to make the
Electronics Forum | Thu Dec 13 10:39:38 EST 2007 | lloyd
Hi Mefunak, I'd say that the vacuum holding circuit is at fault. If the component is picked OK from the feeder ('vacuum check after pickup' is switched on) then the component is being dropped from the head as the gantry moves to the placement positi
Electronics Forum | Fri Oct 08 07:04:19 EDT 2010 | roycet4
Try making your own out of the IC tubes.. I used to do this all the time when I was using Siemens. Not as good as the metal slides from Siemens but it will work good enough..
