Electronics Forum | Wed May 27 07:53:41 EDT 2009 | padawanlinuxero
Thanks ! I will try your recommendations, about the flux and the preheaters, yes they seems to be ok I will bring down de conveyor speed because it looks like if it is to fast is set to 3.6ft thanks again!
Electronics Forum | Wed May 27 11:54:29 EDT 2009 | allwave
Armando, Make sure chip wave is pumping evenly across. These TD machines require a lot of maintenance (deep cleaning)to ensure all the holes on nozzle are open... My two cents, George
Electronics Forum | Fri May 29 02:08:08 EDT 2009 | cobar
Check that you are getting an even spray pattern from the fluxer.Check that the chip wave nozzle is clean and if possible feed the PCB in to the wavesolder unit at 90 � or 180�.
Electronics Forum | Tue May 26 06:56:40 EDT 2009 | xinxi
Hi! From your post, it seem like the wave did not really touch the component. You probably need to get the both wave height correct and that it hits the component.It is normal for solder to come through the PCB when using chip wave. The through-hole
Electronics Forum | Mon May 25 21:10:28 EDT 2009 | padawanlinuxero
Hello !! I have a problem with my wave solder oven, in one of the products we made has connectors on one side of the pcb and in the other one has SMT components the process is kinda tricky on the SMT components we use an adhesive and put to the refl
Electronics Forum | Mon Feb 13 16:24:39 EST 2006 | samir
SPC was a fad of the '80's and has been mis-used by the igonorant for decades now! Doing SPC on defects is a case in point. Hell I implemented wave SPC programs before eating breakfast at 2 previous companies, and they worked great..resulting in 25
Electronics Forum | Mon Jun 14 22:49:46 EDT 2004 | Ken
Um...I would reject those boards. skip plating is a process indicator...a bad indicator. IF your building to class 3...I would get the rep in ASAP and reject the lot.
Electronics Forum | Wed Sep 22 06:28:35 EDT 1999 | Bach Huss
Hi All, We have 19 Siemens machine running here and lately I was assigned to come out with a proposal on the wrong part issue on Siemens Machines. All of our machines are equip with siemens part verification in which there the part barcode is scanne
Electronics Forum | Thu Jul 23 03:15:43 EDT 2015 | padawanlinuxero
So let me get this straight you want the mydata to pick the SOT-23 from the reel tape take it to a part of the y-wagon put the SOT-23 inside the programmer, program the sot-23 have the midas (which is the only one can do something similar) pick up th
Electronics Forum | Wed Jul 22 19:22:13 EDT 2015 | mikemoriel
its in a standard SOT-23 package, designer suggest using a Microchip Universal 6L SOT-23 Socket Module (AC164321), but its no going to be manufacturing friendly
COT specializes in high quality SMT nozzles and consumables for pick and place machines. We provide special engineering design service of custom nozzles for those unique and odd components.
2481 Hilton Drive
Gainesville, GA USA
Phone: (770) 538-0411
.gif)
