Electronics Forum | Fri Feb 14 14:38:44 EST 2025 | linux
We have experience with a lot of these components, It does come down to the connector type you are placing, I would need the connector spec to assist you.
Electronics Forum | Tue Jan 28 15:00:22 EST 2025 | klauss
I want to place a connector near the edge of a PCB using a Panasonic Pick and Place machine. One-third of the connector (the part with the smd pads) sits on the PCB, while the remaining portion hangs off the edge. When the connector isn't seated prop
Electronics Forum | Fri Oct 15 15:03:32 EDT 2021 | kumarb
Hi. Personally do not have experience with this but we are reviewing the purchase of an X-ray system for our line. A tier 1 vendor we have worked with is Seamark that is a popular name in Asia. They offer some X-Ray equipment including a counter tha
Electronics Forum | Mon Oct 18 18:17:50 EDT 2021 | cyber_wolf
I brought all the major players machines in house and tried them. VisiConsult was the best hands down. Extremely simple GUI..no adjusting to get correct counts. The counting cloud feature is also a very slick tool. Support is 5 star.
Electronics Forum | Wed Oct 27 07:34:14 EDT 2021 | reinhardk
Hi, we have a DAGE Assure machine, and we are happy with the results it gives us. Even without proper teaching the results were good (for common part sizes). *With* proper teaching results are even better. Only in certain cases results are unusabl
Electronics Forum | Fri May 01 13:31:36 EDT 2020 | emeto
Omron were building some hybrid AIO/X-ray in one machine package
Electronics Forum | Fri Jun 14 00:47:17 EDT 2013 | mun4o
Thanks , Reese.Yes , I check the capacitors with C-meter.When measured with C-meter , all capacitors are OK - +/-10% of the value. I can not underst?nd "Note: This is not a summation). Y5V -- -20% of nominal value, -part tolerance, -machine toleranc
Electronics Forum | Thu Sep 10 17:28:28 EDT 1998 | Dave F
| I need packageinformation for smd comp. from as many suppliers as possible to program my pick and place machines | Thanks! | BGu. BGu: What's the deal??? Didn't your equipment supplier provide you with a component library? Dave F
Electronics Forum | Tue Jul 18 11:32:40 EDT 2006 | Joris Groot koerkamp
I am wondering what skills operators need to run an smd line itself. At our company they know how the pick&place machine works (refill/ changover), but if there is a problem with wrong placed components they don't known what to do. Our managmenttea
Electronics Forum | Tue Jul 18 15:47:07 EDT 2006 | Mark
IPC610 training to help verify issues that might arise. Also, the opeators need to know part numbers and descriptions because that should be common knowledge when running a SMT line. Plus, with your comment "At our company they know how the pick&plac
