Electronics Forum | Thu Mar 18 14:33:46 EDT 2010 | jdumont
Is your peak reflow temp exceeding the LED spec? We store our SMT LED reels on the rack with the rest of the discreets and have never seen this issue...
Electronics Forum | Wed Jun 12 08:01:04 EDT 2013 | mun4o
hi, i have problem with ceramic capacitor 10uF ±10% 16V X7R 1206.Problem is as follows:ICT ( Teradyne 8851 ) measured value 6 ?? 8uF ( about 70% of all lot).I decide that components ( samsung ) are defective.I buy one "type&reel" capacitors "Murata"
Electronics Forum | Tue Jul 18 16:40:09 EDT 2006 | dphilbrick
We have a system where when we set up the line to run a job before the first part is placed an auditor verifies we have all the correct parts loaded on the machines in thier correct locations. We then run a first article. The board is inspected to in
Electronics Forum | Sat Jul 30 01:36:04 EDT 2005 | Christofer Lapinskas
We are looking to have SMD components taped and reeled in Brazil. Are their any suppliers in Brazil? cl@latrex.com.br
Electronics Forum | Sat Jul 30 01:36:47 EDT 2005 | Christofer Lapinskas Latrex
We are looking to have SMD components taped and reeled in Brazil. Are their any suppliers in Brazil? cl@latrex.com.br
Electronics Forum | Tue Mar 30 10:43:21 EST 2004 | Robert
I could use some help too. I have a bunch of SMD 4 Pads Inductors from Central Technologies. The dimensions of the part is 11.30x13.9x6.9 . I've called four companies already and none were able to find a carrier for this part. These parts are on plas
Electronics Forum | Thu Apr 13 13:38:29 EDT 2006 | smdtapesplice.com
We have the perfect SMD Tape Splice solution that runs flawless through your pick and place machine. Our splices run through Fuji, Panasonic, Siemens, Juki, Universal, Quad/Tyco, Samsung, Sanyo, Mydata etc.. We have a loan program for testing our T
Electronics Forum | Sat Jul 23 09:19:17 EDT 2016 | dalpets
I want to place smd's by hand from tape strips using a vacuum pump. What is the orientation of polarised smd components on reels/tapes? Is there a standard manufacturing orientation, or are there variations? I understand some manufactures have part
Electronics Forum | Sat Jul 23 18:16:31 EDT 2016 | ttheis
This information is normally available in the component's data sheet (typically toward the end where the packaging is detailed.)
Electronics Forum | Fri Jul 29 13:42:38 EDT 2016 | gregp
The standard you need is EIA-481B. It details the taping of components from 8mm tape up to 200mm tape including component orientations. 8, 12, 16 and 24mm tape has the sprocket holes only on one side so it is easy to determine the proper orientatio