Electronics Forum | Wed May 31 22:17:24 EDT 2006 | EC
Hi Jack, I do not know what type of machine you are using and how old is your machine. But I have this problem before using Fuji machine. There are few things cause part throw.....placment speed, feeder, pick up tolerance, part dimension tolerance,
Electronics Forum | Fri Jun 14 02:53:15 EDT 2002 | myfloh
It is a FUJI Line with the machines: GP641 GL641 CP6 IP3 the oven is the smt Quatro peak. Moreover we have an AOI.
Electronics Forum | Thu Jun 13 11:30:41 EDT 2002 | davef
Most SMT lines are comprised of several pieces of equipment. Each piece of equipment, the components, the plant environment, and the people running the line can have / cause variations in their operation that each can affect product quality. Consid
Electronics Forum | Mon Jun 17 17:02:38 EDT 2002 | kenbliss
Dave, in theory I agree with you, but in the real world isn't the expensive fruit, the fruit you spend countless hours trying to fix a small defect that has a fixed cost, the cost of the board as a single unit. Versus the cost of running the factory
Electronics Forum | Fri Jun 14 00:35:58 EDT 2002 | kenbliss
DaveF's request for more data of course is needed to be specific, but here are a few ideas and places to start. If the SMT line is causing the defects you need to identify where on the line the problem is being caused. What we see regularly is mish
Electronics Forum | Thu Jun 20 18:56:31 EDT 2002 | stepheno
If you don't already have one, the best investment you can make in your case is a good thermometer/humidity meter. They are not at all expensive. Then record the temperature and RH about 4 times a shift. After a few weeks (maybe sooner) you can se
Electronics Forum | Sun May 28 23:01:31 EDT 2006 | jacksaria
Hello to all, We are encountered many problems/defects in SMT lines.I would like to know your suggestion or recommendation for SMT optimization and improvement. What are the step by step solutions in order to optimized and to improve the printer, pi
Electronics Forum | Thu Jun 01 03:59:39 EDT 2006 | ts
there should no issues for CM402 or 301.
Electronics Forum | Thu Jun 01 04:01:33 EDT 2006 | ts
The PT200 at line converter able to optimize your program to balance the line.
Electronics Forum | Thu Jun 01 23:32:26 EDT 2006 | ec
Hi Jack, Already send to you.
Main Products: 1. Original new and Original Used SMT/AI Spare Parts. 2. SMT Equipments And Related Machine( SMT Calibration, SMT Feeder Carts,Conveyer etc.) 3. Maintenace and Repair Service Pre-Sales Service Provide details ab
Manufacturer's Representative / Manufacturer / Equipment Dealer / Broker / Auctions / Consultant / Service Provider
3 Road Xintang， Fuhai Street，Fuyong
Shenzhen, 30 China
Phone: 13713862102
winsouce.jpg)
