Electronics Forum | Thu Oct 24 23:24:55 EDT 2013 | wesleyintelli
Does anyone know of any good profile prediction software for free, trial or on the market that is not coupled with hardware. We want to specify the environment, paste, board and oven etc variables and have the software suggest the best cavern temper
Electronics Forum | Mon Oct 28 08:27:53 EDT 2013 | emeto
There are many profilers(physical devices) on the market. Most of them have software that makes predictions based on information about the paste, oven model...., but I wouldn't trust the predictor as on your boards you will have different parameters
Electronics Forum | Tue Feb 19 10:50:13 EST 2019 | rgduval
Call Heller directly, and give them the oven, and relative thermal density of the board, as well as the solder paste that you're using. They'll be able to give you a baseline profile to start from (both RTS and RSS). Otherwise, use a thermocouple p
Electronics Forum | Fri Nov 24 01:12:28 EST 2000 | SARRY
Hello! All I am an almost smt biginner. I have a few questions My question is 1. what will be changed to use lead free solder paste in a smt production line? 2. what is the reflow profile for lead free solder paste? Don't just tell me to search th
Electronics Forum | Wed Jul 13 14:50:29 EDT 2005 | rameshn
Dear Sir, We are manufacturing Computer Motherboards & Networking products (which are having 2 to 3 BGA Chips onboard) in our plant. we are having 2 nos of HELLER 1800W model Reflow Ovens. this model reflow oven is having 9 heating zones at both top
Electronics Forum | Mon Jul 18 01:47:29 EDT 2005 | Cal
I would suggest 1) Use the profile that is suggested with the BGA types you are using or 2) Have you solder paste rep visit for a half day and help profile your machine. Remember if they want to keep you as a paste customer they will help. Enjoy,
Electronics Forum | Mon Jul 18 02:47:27 EDT 2005 | grantp
Hi, It sounds like your a little new at profiling, and can be difficult to do well. We purchased a KIC profiler that has software that will take your profile data and tell you the best oven temperature settings and conveyer speed to use. You need
Electronics Forum | Fri Nov 10 09:21:20 EST 2006 | Steve
I had a PDR Lightmaster Pro at the last place I worked at, and I thought it was the best rework station I've ever used. Not only because of the fact that no nozzles were needed, but the heat delivery from the focused IR light was superb. I don't know
Electronics Forum | Tue Jul 28 17:23:58 EDT 1998 | Robert Steltman
| | We are about to run our first BGA devices and would appreciate some confirmation on a few points. | | First some details: | | PCB & Device: | | ============= | | 1) 16 layer (4 power, 4 gnd, 8 signal) | | 2) gold on nickel finish | | 3) ceramic
Electronics Forum | Thu Jan 26 12:46:53 EST 2017 | dyoungquist
We run double sided boards that have large SMT electrolytic caps on the top side using the same profile for both sides. The trick is to do the bottom side first, then the top side. That way you do not need to glue down the large caps.
Main Products: 1. Original new and Original Used SMT/AI Spare Parts. 2. SMT Equipments And Related Machine( SMT Calibration, SMT Feeder Carts,Conveyer etc.) 3. Maintenace and Repair Service Pre-Sales Service Provide details ab
Manufacturer's Representative / Manufacturer / Equipment Dealer / Broker / Auctions / Consultant / Service Provider
3 Road Xintang， Fuhai Street，Fuyong
Shenzhen, 30 China
Phone: 13713862102
.gif)
