Electronics Forum | Thu Jan 26 20:12:46 EST 2012 | gaz
We have a thermocouple that is basically some tc wire plugged into our reflow oven. The oven converts these voltages into the readings, but are all K type thermocouple wire the same, so would have the same exact same values sent to the ovens cpu? I
Electronics Forum | Fri Jan 27 09:00:14 EST 2012 | davef
A thermocouple is a set of two wires welded together at one end, where a junction is formed between the two wires. Because each wire is composed of a different type of metal, each wire reacts differently to the temperature of the junction. Because of
Electronics Forum | Thu Apr 15 11:53:37 EDT 2004 | Claude_Couture
Hi everyone, Our QC manager is bugging me about calibrating the TC readings on our reflow ovens. I keep telling him that doing a regular reflow profiling with a mole is sufficient to see if the oven temperature are normal. The manuals state that TC c
Electronics Forum | Thu Apr 15 16:33:40 EDT 2004 | wgaffubar
We never really use to calibrate the thermocouples on our reflow oven or wave solder systems, but we did disconnect the T/C's and input a calibration standard to check that the computer cards were correctly reading the proper temperature for a given
Electronics Forum | Thu Apr 15 20:41:22 EDT 2004 | Ken
There are ledgitimate reasons for checking furnace calibrations, but let me clarify what that is. 1. TC's are not necessarily calibrted. Not unless you need "absolute" accuracy. TC's operate against a (non-linear) standard +/- a tolerance. Most
Electronics Forum | Fri Apr 16 07:34:10 EDT 2004 | Claude_Couture
Ken, thanks for your answer, it is much better presented than what I was fed by our qc. By "calibrating TCs" I meant the readings the controller is displaying on the screen. So that would be the converter that we would check and calibrate. Thank you
Electronics Forum | Thu Aug 10 05:53:10 EDT 2000 | pascal MATHIEU
hello everybody , i am looking for the elementary caution you need to take when you reflow large board with several thousands of smt components . thank you for your advise
Electronics Forum | Tue May 04 10:59:23 EDT 2004 | Evtimov
Hi, It depends of your boards(are they for SMD or not) and how many boards you assemble. The process at all is like that: 1.Stencil printer - to adjust the paste 2. Pick and place machine(for your quantity) 3.Reflow oven Theese are the machines you
Electronics Forum | Wed Jul 13 14:50:29 EDT 2005 | rameshn
Dear Sir, We are manufacturing Computer Motherboards & Networking products (which are having 2 to 3 BGA Chips onboard) in our plant. we are having 2 nos of HELLER 1800W model Reflow Ovens. this model reflow oven is having 9 heating zones at both top
Electronics Forum | Wed Nov 15 15:51:21 EST 2006 | RJ K.
I have been looking into buying a rework station like ERSA or PDR. What I am questioning is how well will these systems reflow BGA's with metal top/cover that are reflective. In addition, when preheating the board would dark body packages absorb te
Main Products: 1. Original new and Original Used SMT/AI Spare Parts. 2. SMT Equipments And Related Machine( SMT Calibration, SMT Feeder Carts,Conveyer etc.) 3. Maintenace and Repair Service Pre-Sales Service Provide details ab
Manufacturer's Representative / Manufacturer / Equipment Dealer / Broker / Auctions / Consultant / Service Provider
3 Road Xintang， Fuhai Street，Fuyong
Shenzhen, 30 China
Phone: 13713862102
