Electronics Forum | Tue Dec 12 14:47:55 EST 2000 | Chris Newell
We run Siemens SiPlace SMT equipment. One of our biggest problems is feeder tape splices jamming our feeders. We use Siemens recommended method of splicing our feeder tapes together. This has been causing upwards of 10% lost time on some of our build
Electronics Forum | Wed May 21 20:58:48 EDT 2003 | star7483
APPLICATION: SMT CARRIER TAPE FEATURE: �� High efficiency: joining is accomplished without shutting off the machine. The SMT machine can increase output 5%-15%. �� Reducing SMT machine and feeder abrasion: There is no need to unload & reload feeder
Electronics Forum | Wed Dec 13 08:28:37 EST 2000 | CAL
1)having the leader tape overlap and taped square is key. 2)making sure the Butt splice of the carrier tape is cut square and come together with no gaps 3) I would put a piece of yellow splice tape on the underside of the carrier tape to help hold th
Electronics Forum | Wed Dec 13 12:08:57 EST 2000 | Stefan Witte
Apparently the adhesive tape peels off from the joint, which could have some reasons. 1. There should be an overlap of the cover tape, as Cal mentioned. The new cover tape laying over the old by approx. 2mm. I also peel the cover tape a bit off, whi
Electronics Forum | Wed Dec 13 03:40:13 EST 2000 | G. English
We have seen this problem, again using the methods recommended by Siemens. We tried different methods of splicing the tapes, but again the material was clogging in the feeders and especially in the cogs which grip and feed the tape. The only method
Electronics Forum | Thu May 22 10:26:55 EDT 2003 | dougt
Wow, sounds awesome, gotta have 200 of them! Sign me up! Here's my credit card number.......
Electronics Forum | Thu May 22 15:09:10 EDT 2003 | russ
So, who what where do we get this? Russ
Electronics Forum | Thu May 22 16:13:12 EDT 2003 | bpan
what the hell kinda question is that???? Go place your ads on a billboard. I'm out
Electronics Forum | Fri May 23 08:14:28 EDT 2003 | caldon
I'm in if it comes with the Ronco Orange juicer, Mouli Knife, and the nifty jar opener.................... YAWN
Electronics Forum | Tue Sep 28 11:38:22 EDT 2004 | jsloot
Can anyone recommend a manufacturer in Canada for SMT tape splicing tools? Thanks
Main Products: 1. Original new and Original Used SMT/AI Spare Parts. 2. SMT Equipments And Related Machine( SMT Calibration, SMT Feeder Carts,Conveyer etc.) 3. Maintenace and Repair Service Pre-Sales Service Provide details ab
Manufacturer's Representative / Manufacturer / Equipment Dealer / Broker / Auctions / Consultant / Service Provider
Building A, Jiepeng Square, Fuyong
Shenzhen, 30 China
Phone: 0755-33578694
.gif)
