Electronics Forum | Fri Mar 11 10:00:22 EST 2005 | ???
Anybody out there know of a good (2nd) source to purchase single magnetic board supports used on quad/samsung machines. These are spring loaded and contact the underside of the board in the pick n place machine
Electronics Forum | Thu Jul 27 08:03:18 EDT 2006 | Chunks
Hi H.K.H. OK, I'll step on this one to see what happens... What exactly is the defect? You state this SMT spring acts as a conductor between an R and C. You also state it acts as a housing shock absorber too? Just trying to understand your quest
Electronics Forum | Thu Jul 27 00:40:34 EDT 2006 | Habibooboola K. Halaliliaholiokeebob
I have a production defects on smt mounted spring that the designre at my compnay is try.the spring act as conduction between the resistor capacitor network and mount with the prefrom and then reflow thru the oven. the design intent for spring is mec
Electronics Forum | Tue Sep 07 10:24:49 EDT 2021 | leeg
Has anyone had much experience of using the "POGO" (Spring Loaded pins during SMT? If so what issues did they encounter initally?
Electronics Forum | Thu Feb 01 18:04:56 EST 2024 | erikfriesen
Are those discs spring loaded somehow, or just manually tightened?
Electronics Forum | Tue May 24 18:20:05 EDT 2005 | gregcr
Hi All, I am looking for a supplier for the hardware used on reflow SMT carrier pallets. I know that there are many vendors who can make the pallets themselves, but where do they get the locator pins or spring clips. I'm not sure if each vendor ju
Electronics Forum | Tue Oct 25 14:51:49 EDT 2005 | bobpan
5v or 12v feeders.....and are you sure the parts fit through the feeders and are not getting jammed. On some of the old feeders you had to remove the springs and other parts to make the tall caps work.... chow
Electronics Forum | Thu Feb 03 20:43:09 EST 2022 | chuckphd53
Yes, it is being pushed into the paste, did a slow place motion and you can see the nozzle press (spring) as it reaches the board height... the nozzle is black, and I tried a new nozzle also... good thoughts tho.... much apreciate the help...
Electronics Forum | Wed Dec 06 07:24:22 EST 2006 | davef
Successful solder paste overprint is a function of the solder paste rheology, solder mask and through hole component stand off. * Solder mask with a high surface energy will permit a larger overprint than a solder mask with a lower surface energy. In
Electronics Forum | Mon Jun 04 23:52:57 EDT 2012 | rway
Actually, if you experience lack of witness marks, you probably have a problem. Witness marks are OK and will not affect your assembly. I assume this is an SMT assembly we are talking about, in which case, this is what your test pads are for. You
Main Products: 1. Original new and Original Used SMT/AI Spare Parts. 2. SMT Equipments And Related Machine( SMT Calibration, SMT Feeder Carts,Conveyer etc.) 3. Maintenace and Repair Service Pre-Sales Service Provide details ab
Manufacturer's Representative / Manufacturer / Equipment Dealer / Broker / Auctions / Consultant / Service Provider
Building A, Jiepeng Square, Fuyong
Shenzhen, 30 China
Phone: 0755-33578694