Electronics Forum | Sat Apr 21 14:50:17 EDT 2012 | edmentzer
We are using SN100C in both our wave and selective machines and have very good results. We also using it for ROHS hand soldering. It flows better than SAC305, the joints are shinny just like Sn63/37. We are looking into using SN100C as our paste b
Electronics Forum | Wed Apr 18 10:05:24 EDT 2012 | dyoungquist
We started with SN100C from the very beginning when we purchased our selective solder machine. It has been working well for us. I can't speak to what happens when changing over to it, but I've heard of many companies using SN100C for selective sold
Electronics Forum | Fri May 04 08:37:45 EDT 2012 | waveroom
SN100C is being used by 95% of our customers over the SAC305. The main reasons are Cost big savings easily $10.00 lb, nice shiny solder joints good for quality inspection. Very few people are using SN100C in SMT Due to increased temperature requireme
Electronics Forum | Wed Jan 11 18:44:42 EST 2006 | fctassembly
Hello Greg, Glad to hear your success with the SACX0307 copy. By the way, does the P mean it contains phosphorus? Does yours also contain bismuth like the SACX0307 (according to their plumbing solder patent for X0307)? In response to your discussion
Electronics Forum | Wed Jul 27 09:47:01 EDT 2005 | GCampbell
CEMCO Uk have done testing using SACX0307, SAC305 and Sn/Cu/Ni. The copper dissolution tests (report available) conducted at CEMCO showed that the lowest copper erosion rate was achieved by SACX0307. Regards Gerry
Electronics Forum | Thu Jan 17 09:07:14 EST 2013 | mun4o
hi, we use SACx0307 since 2006 year.now , I want change this alloy with SN100C?I now that we must remuve all solder in the pot and cleen it.But that is very difficult process.What you think, can I just add new SN100C in the solder wave?What is the ri
Electronics Forum | Wed May 02 02:41:30 EDT 2007 | May
Of course it is needless to say the performance of SACX0307 is worse than SAC305, and also to some other lead free solders,eg SN100C & SCS7.
Electronics Forum | Fri Nov 09 08:57:56 EST 2007 | bbarton
By and large, the industry has determined that SAC alloys are the "best fit" for replacement of SnPb in our industry. SAC305 seems to be the default alloy at this time. There are several other alloys out there, each with their own strengths and weakn
Electronics Forum | Mon Jul 17 10:10:57 EDT 2006 | slthomas
Any comments as to how corrosive it is to a solder pot, relative to SN100C?
Electronics Forum | Fri Jan 20 08:27:28 EST 2006 | Loco
Just wondering what the companies that are use SN100C are using for reflow (I guess SAC), and especially for handsoldering. Do SAC and SN100C mix? are there any studies proving this?
