Electronics Forum | Mon Jun 07 17:28:07 EDT 2004 | edatasys
LSP is 'Long Soak Profile'. See http://www.aimsolder.com/tds/NC_297DX_Sn62_&_Sn63_Solder_Paste.pdf Looks like a variation of the RSS, with you guessed it a longer soak.
Electronics Forum | Tue Oct 09 08:30:22 EDT 2007 | davef
As a starting point, follow the guidance of your paste supplier: http://www.aimsolder.com/tds/WS%20353%20Sn62%20&%20Sn63%20Solder%20Paste.pdf
Electronics Forum | Thu Jan 15 09:04:36 EST 2004 | rkevin
Does anyone have any information about eliminating voids on BGA using SN62 as opposed to the normal Sn63, something which explains the inter-metallic layers which form during the soldering process and the leaching out of silver ?
Electronics Forum | Thu Oct 01 16:56:40 EDT 2009 | gplume
Does anyone out there have experience soldering with Pb solder (Sn 63 or Sn 62) to SAC 305 coated PCB lands (about 50um) or Sn-Cu plated lands (about 10um). I know soldering Pb free (Sac based soler) to Pb/Sn coated lands is a no-no, but was waonderi
Electronics Forum | Wed Oct 22 12:13:18 EDT 2008 | brismittr
A no-clean paste with an above average amount of halides should do the trick. Kester EP256HA is a good choice for this application if you are using a leaded alloy (Sn63 or Sn62).
Electronics Forum | Mon Oct 18 11:01:26 EDT 2004 | DenisM
I have had similar problems and my customers have had this too. A two story drop test was made by one of my customers and they found that changing Sn63 solder to Sn62 solder made a significant impact. There is no real downside other than a slightly
Electronics Forum | Tue May 06 22:31:52 EDT 2003 | yukim
Yes, we did try: built a lot of 200 PCBs with Sn62Ag2 solder paste (we have been using Sn63) and it helped, but not eliminated the problem.
Electronics Forum | Tue Mar 20 06:09:20 EDT 2007 | d0min0
Hi, can't find answer to my question on web - maybe someone can help would it be compatible to use a wire of Sn62Pb36Ag2 for a product made with Sn63Pb37 paste ??? regards
Electronics Forum | Fri Oct 02 11:23:08 EDT 2009 | floydf
Does anyone out there have experience soldering > with Pb solder (Sn 63 or Sn 62) to SAC 305 coated > PCB lands (about 50um) or Sn-Cu plated lands > (about 10um). I know soldering Pb free (Sac based > soler) to Pb/Sn coated lands is a no-no, but
Electronics Forum | Tue Nov 21 09:46:19 EST 2006 | jax
I assume you are talking about Sn62Pb36Ag2 solder. You should not see any added concerns when subjecting Sn62 to multiple reflow cycles as compared to Sn63. As compared to Sn63Pb37: Reduced leaching issues Increased Wetting due to lo
