Electronics Forum | Thu Jul 27 12:54:53 EDT 2000 | John Thorup
Hi Jason I think Wolfgang has this one nailed. If it's the same four pins every time and nothing changes this, even rotating the board 90 degrees, then you're probably going to find something like a ground plane connected to them. I don't think sol
Electronics Forum | Sat Jul 29 00:44:30 EDT 2000 | Jason
Thanks for all the ideas. I tried solder "thieves" by placing some desoldering wick behind the briging pins and it worked! I have yet to try Chrys' idea but I will first thing Monday. This is a new board that has had this problem from day one. I
Electronics Forum | Fri Jun 16 11:28:53 EDT 2000 | Boca
Solder 'follows' heat. 1. Preheating is a great idea, use a baking oven to get the whole assembly up to temperature, use the preheaters in your wave solder machine (without wave) to preheat the assemblies ... 2. Or use the biggest soldering iron
Electronics Forum | Tue May 09 22:57:58 EDT 2006 | davef
The NexLev connector is built in a stripline construction, providing a continuous ground plane for each signal contact. The connectors come as tenrow connectors with 100, 200, or 300 positions at possible stacking heights from 10 mm to 30 mm. Technic
Electronics Forum | Thu Feb 10 09:08:21 EST 2000 | C.K.
We've got this hard-to-Wave-solder board where all of the SMD's are on a ground plane - in fact the entire bottom-side is a ground plane. Our designers have incorporated thermal relief on some of the pads, but for reasons unknown to us, they don't h
Electronics Forum | Wed Nov 21 19:45:36 EST 2001 | Yngwie
Hi Guys, I need help. I�ve a trouble with non-wetting problem on the lead of 208 pin, 20 mils pitch QFP. We are on intrusive reflow. I never faced this problem before on this product after running them for about 2 years now. This occurred on one pa
Electronics Forum | Wed Oct 15 17:40:42 EDT 2008 | bandjwet
Dear SMTNetters: What are some favorite techniques for getting all of the solder from a plated throughhole on a heavy ground plane area? We are using a SAC 405 alloy. Regards BWET
Electronics Forum | Thu Feb 10 22:31:11 EST 2000 | Dave F
CK: If you�ve done everything under the sun process-wise at the wave: different fluxes, more heat, less heat, more contact time, and less contact time; and are running out of ideas; let me table some thoughts. � "Don�t mess with Mother Nature."
Electronics Forum | Wed Feb 16 07:55:19 EST 2000 | Dave F
CK: I hear you about pads. Most secondary side SMT pads are primary side SMT pads that are on the secondary side. This only matters when boards are wave soldered. Rather than changing to larger components, consider a bigger fight than that ... ge
Electronics Forum | Fri Feb 11 10:14:54 EST 2000 | C.K.
Dave, to answer your questions, point-by-point: � Just out of curiosity, how are second side, skippy components oriented on the board with respect to the wave? The SMD's are all oriented in the "correct" direction with respect to wave direction(i
COT specializes in high quality SMT nozzles and consumables for pick and place machines. We provide special engineering design service of custom nozzles for those unique and odd components.
2481 Hilton Drive
Gainesville, GA USA
Phone: (770) 538-0411
winsouce.jpg)
