Electronics Forum | Thu Jun 26 12:46:33 EDT 2008 | frankr
One way we handle this situation is to produce a wave pallet that presents the pcb at an angle to the wave to stagger the leads of the connector.
Electronics Forum | Thu Jun 26 13:24:25 EDT 2008 | realchunks
Do you glue SMT parts on the bottom? If so, use your SMT glue to prevent the short. Just cut a new stencil with 0.020" wide apertures between the pads of the connector (bottom side). We do it all the time.
Electronics Forum | Wed Jun 25 11:30:04 EDT 2008 | samir
or... like this? 0 0 0 0 0 0 0 0 0 0 0 0 FLOW DIRECTION --->
Electronics Forum | Wed Jun 25 11:24:20 EDT 2008 | namruht
I do not have a lot of specs at the moment. I just wanted to get some opinions and some of you thinking. I will get some part specs and add to this post later. WE are running a pretty big PCB and ther are some connectors on the edge of the board. T
Electronics Forum | Mon Dec 17 02:08:21 EST 2007 | mun4o
Hi, I have a lot of solder bridge in our wave soldering process.We use SACX0307 and Surf 11 flux.the SW mashine is Vitronics delta 6622.Itry to change flux and termoprofile but results is not god.Can you halp me - recommend me some flux or other adv
Electronics Forum | Tue Sep 12 04:48:26 EDT 2000 | Daniel
Is there a risk of popcorning plastic components during wave soldering? (The PCB is first surface mounted, reflowed and washed. It is sometimes left in air environment for as long as 48 h before the throgh hole components are mounted and they are wa
Electronics Forum | Fri Mar 05 08:51:06 EST 2010 | pjc
Just got this off the wire, new IPC A610E Document -due out in April: http://www.solder.net/marketplace/product_desc.asp?Sku=IPC-A-610E&Category=61
Electronics Forum | Mon Mar 01 11:56:51 EST 2010 | pjc
Your IPC-610 workmanship manual will have the answer for you (I don't have the latest at my fingertips). Depends on what class you are building too, 1, 2 or 3 and the application of this connector on the product- which you must determine.
Electronics Forum | Sun Feb 28 20:05:54 EST 2010 | aungthura
Dear all There are alot sockets in our products,BIB.These skts are lifted abit after being solderd with wave machine.If the skts become lifted, how much tolerance of the high is acceptable? as example 1mil~5mil,or,1mil~8mil. Pls advise me. Thanks in
Electronics Forum | Mon Dec 17 21:11:13 EST 2007 | davef
Thanks bud. Merry Christmas and happy holidays to all.
.gif)
.gif)
