Electronics Forum | Thu Aug 25 10:17:48 EDT 2005 | davef
Send the pic to dave5252 at hotmail.com [you can't send pic through the SMTnet email thing] For more on via plugging, tenting, capping ... look here: http://www.merix.com/technology.php?section=processes&page=pdf/Via_Fill_Plug.pdf Something, a voi
Electronics Forum | Sat Aug 27 09:47:05 EDT 2005 | davef
From the pic, we see blistering, but none so close to via that we'd attribute the blistering to via, via plugging, or anything of the sort. When we see blisters like this, we think of a surface contaminant being present on the boards at the time of
Electronics Forum | Wed Aug 24 21:57:45 EDT 2005 | adeline_ko
The blistering is around the plugging via. I can forward you the pic. For the plugging process, I'm not too sure how they plug. What is the correct practise for the plugging via. Now, what they did is. They will do a tenting process for both side.
Electronics Forum | Thu Aug 21 23:35:20 EDT 2003 | kennyg
For ICT purposes I may need to print solder paste on 0.015" test vias. No-clean is not an option for this assembly and OA seems the only choice. Can flux be safely removed from inside the via from the other side during a standard water wash process
Electronics Forum | Tue Jan 31 15:52:39 EST 2006 | russ
I have never related Solder mask layout to Black Pad. I don't see how they could be related but.......
Electronics Forum | Sat Mar 20 00:58:10 EST 1999 | Mike C
| After rmoving a BGA (plastic)to correct unexplained shorts | I installed another BGA using flux only. | Checking on an X Ray machine and found two shorts. | | can anyone give a good explenation ? | | Thanks | | Ron | Another possibility Via's n
Electronics Forum | Wed Jul 14 11:36:56 EDT 1999 | Jimmy Strain
| | | Hi All, | | | Does any one experienced the solder on gold finger after | | | reflow. Its about 5 to 8 mils diameter . | | | We'd clean the entire screen printer, mounter & reflow as well, | | | but doesn't help much. | | | | | | | | Mr Kong..
Electronics Forum | Fri Jun 15 13:17:27 EDT 2001 | CPI
Are you exposing so you can solder and SMD component directly to it? If not are there ant vias near by that connect to the area you are trying to expose? If not I have done as Dave suggested using a dremal tool. Messy but it works.
Electronics Forum | Mon Dec 13 00:48:33 EST 1999 | armin
Hi All I have a 0.7 mm diameter hole for vias, what�s the minimum annular ring for this hole diameter? What�s the term unsupported and supported holes refer to in IPC-2221 9.1.2 Annular Ring Requirements? I have a proto-type PCB (designed by our R&
Electronics Forum | Fri Oct 08 09:43:27 EDT 2004 | davef
First, don't get too excited about the thermal capabilities of conductive epoxy. An epoxy like DuPont CB-100 increases the amount of heat conducted through the barrel, but many over estimate what it can do. Calculations show for a 0.020" drilled
COT specializes in high quality SMT nozzles and consumables for pick and place machines. We provide special engineering design service of custom nozzles for those unique and odd components.
2481 Hilton Drive
Gainesville, GA USA
Phone: (770) 538-0411