Electronics Forum | Tue Jul 01 11:15:43 EDT 2003 | PH
Are these caps on the bottom side or topside? Bottomside could be the glue dots are too big for the caps your putting down, the glue cures and then the solder is putting force on the edges of the cap causing cracks.. Other than that agree with oth
Electronics Forum | Mon Jul 07 00:11:10 EDT 2003 | praveen
if the capacitors are placed very near to the edge and their position is 90 deg than it may cause crack.4thly if the reflow ramp rate is more than 3 deg C then it may crack. 5th ly if the solderin tip temp. is very high and soldering bit is very thi
Electronics Forum | Fri Jul 04 01:32:15 EDT 2003 | rheise
I've seen numerous incidences of mirror image cracking under endcaps in high dielectric material ceramic capacitors due to thermal cycling. If the cracking is deep enough to extent through the plates you can get breakdown and shorting. Section the ca
Electronics Forum | Mon Apr 04 22:40:07 EDT 2005 | davef
We'd contact suppliers of LPISM. Top LPISM available in the United States are: * Coates ImageCure XV501T & XV501TSM * Coates ImageFlex (Flexible Solder Mask) SV 601T * Enthone DSR 3241 and DSR 3241 GM * Rogers RFlex 8080 LP1 & RFlex 8080 LP3 (Flexib
Electronics Forum | Wed Apr 06 07:28:54 EDT 2005 | liv2xplr
Besides the solder mask suppliers, I would contact some makers of exposure and alignment equipment. Try OLEC (www.olec.com) - they make different types of expsoure equipment. Another good source is a company called All-4-PCB (they rep a number of P
Electronics Forum | Mon Apr 18 14:58:36 EDT 2005 | halal
I have checked the links that you and Will gave to me. I have new info about my task: The task is to summarize the mask aligning methods. The first method: The factory already has an UV machine for the exposure, so they search some positions with a
Electronics Forum | Thu Apr 07 16:31:36 EDT 2005 | halal
Thanks for your answers! I will see them, and I'll write soon what I found helpful.
Electronics Forum | Mon Apr 04 18:19:58 EDT 2005 | halal
Hi! I'm new to here, so let me introduce myself. My name is Szathmari Gabor, and I'm an electrical engineer student in Hungary. There is a task in the university that I have to do, so I ask your help, dear smtnet forumers :) The task is: a factory e
Electronics Forum | Mon May 22 17:14:16 EDT 2000 | Justin Medernach
Hi All, I'm looking for companies who sell in-line solder mask applicators capable of dispensing peelable as well as water soluble mask formulations. Could anyone provide me with some names, please. If this is the wrong forum for this question, I d
Electronics Forum | Tue Nov 04 12:58:17 EST 2008 | smt123
I have to agree with Patrick here. This image appears to show a board that is NOT HASL as there is what appears to be a copper pad in the upper portion of the image. But then again the arrow tip appears to be white and I woudl expect that to be red s
COT specializes in high quality SMT nozzles and consumables for pick and place machines. We provide special engineering design service of custom nozzles for those unique and odd components.
2481 Hilton Drive
Gainesville, GA USA
Phone: (770) 538-0411
