Electronics Forum | Mon Jul 12 12:28:10 EDT 1999 | Wolfgang Busko
| I need some advice concerning reflow of a BGA-292. Since I am not ready to change my entire process to no-clean, I decided to place the lone BGA-292 on a proto run using our BGA re-work station. The pcb is a moderately dense, single-sided, 8-laye
Electronics Forum | Mon Jul 12 12:39:39 EDT 1999 | M Cox
| I need some advice concerning reflow of a BGA-292. Since I am not ready to change my entire process to no-clean, I decided to place the lone BGA-292 on a proto run using our BGA re-work station. The pcb is a moderately dense, single-sided, 8-laye
Electronics Forum | Mon Jul 12 10:21:06 EDT 1999 | Earl Moon
| I need some advice concerning reflow of a BGA-292. Since I am not ready to change my entire process to no-clean, I decided to place the lone BGA-292 on a proto run using our BGA re-work station. The pcb is a moderately dense, single-sided, 8-laye
Electronics Forum | Thu Aug 24 15:37:50 EDT 2006 | Chunks
Hi Any, This is from an earlies thread "Solder Ball After Reflow Process". Date: August 16, 2006 01:52 PM Author: Russ Subject: Solder Ball After Reflow Process Oven settings are meaningless here. What does the board see? It is the paste we a
Electronics Forum | Wed Sep 26 12:16:44 EDT 2012 | bwjm
Hi Guys,recently i am facing an issue. Refer to the attached photo. This PCB is high RF speed, gold immersion single layer. After reflow, my solder seems to have black stains on it. I tried with SAC305 paste water soluble and no-clean, both results a
Electronics Forum | Wed Jul 27 09:58:05 EDT 2011 | davef
Pressure printing systems Conventional stencil printing techniques have fundamental limitations as regards paste handling: The volume of paste available for printing is limited, so frequent replenishment is necessary Paste is difficult to c
Electronics Forum | Sat Jun 27 10:45:18 EDT 2020 | SMTA-Davandran
Hi Indhu, Check for solder paste height. Please manually add solder, mount component and reflow.
Electronics Forum | Sun Feb 06 12:04:06 EST 2005 | ddhanashekar
can some one give me some suggestion to solve the problem. we are using cooksun/alphametal rma9086 paste for our screenprinting. after the reflow we see lot of solder ball on the board. we have maintained the exact profile given by the manufacurer. w
Electronics Forum | Fri Jun 26 14:08:49 EDT 2020 | indhu
Hi, I am having a issue that SMT nut drop after reflow. The solder height all in specifications. Had tried adding flux inand the solder paste. But shows no improvement. Is the nut easily oxidize? Can anyone help me on this?
Electronics Forum | Thu Dec 09 07:21:10 EST 2010 | scottp
You won't have 2 mil height because the solder doesn't remain brick shaped. It's a dome. In the past I tried doing some calculations using the formula for the volume of a spherical section and also tried using a simulation program that accounts for