Electronics Forum | Wed Oct 21 13:50:50 EDT 2020 | kierantennant
hi, I am experiencing a problem with our wave solder machine where zone 2 (forced convection) fan will not work when called upon. so we swapped it with zone 3 to make sure the motor was not at fault and it wasn't so we moved the A1 into a different 2
Electronics Forum | Fri Apr 16 19:32:07 EDT 2021 | mcoass
Hello, I have a very strange problem in a Delta 3 vitronic soltec, drops of tin are fired from the solderpot, I already adjusted the flux profile but these tin stains continue to appear, B.R
Electronics Forum | Tue Sep 15 13:02:55 EDT 2009 | horvath83
What do you think about optimal setup for 8-hour working shift and 16-hour standby time. What is the most energy efficient setup for standby time? Complete cooldown or maintaining temperature in solder pot?
Electronics Forum | Fri Feb 22 13:19:54 EST 2013 | caurbach
Our new Soltec Delta 3 has this feature (they call it mainwave pushup) where you can add up to 60 rpm to the pump after the leading edge passes over the wave. Unfortunately, our old Delta Wave doesn't have this feature. Ideally we'd like to set it
Electronics Forum | Thu Jun 25 09:52:06 EDT 2015 | byviko
Hello, we will buy new wave soldering machine . Trying to decide between two model; Soltec Delta-x and ERSA Powerflow N2. Could you help us , which one is better? most of pcb low volume, others high volume. At first low batch production will be done
Electronics Forum | Mon Jun 29 07:17:25 EDT 2015 | donlockard
Seho maxi wave 3240 should be considered as well. Invented full tunnel nitrogen systems that have lower operating costs and provide yields unlike what can be achieved by air wave systems.
Electronics Forum | Mon Apr 09 09:39:40 EDT 2018 | justconmac
Having an issue with tracking for the Vitronics Soltec Delta 3. Wave will not give error on "expected PCB at exit" but will still show 1+ pcb's in the wave when the machine is empty. This is causing solder pump to idle unnecessarily. Outfeed sensor i
Electronics Forum | Tue Aug 17 18:33:01 EDT 2004 | Hiram
Hi everybody, We are in the process of buying a new wave solder machine. Does anybody have experience working with Vitronics-Soltec (Delta wave 6622-CC for example)? What about Electrovert (Electra)? I would appreciate your feedback. Hiram
Electronics Forum | Tue Aug 24 12:08:43 EDT 2004 | davef
Jon Hall: What were the areas of performance of the Electrovert Vectra that stood above the Vitronics-Soltec Delta?
Electronics Forum | Thu Jan 05 15:34:55 EST 2006 | Joe Wesley
Electrovert does not seem to be cheaper. Still about 30K more than the Delta. We are investigating too, we are concerned about the dross build up and flow design in the electrovert. The Soltec Machine seems to have less of an issue and maintenance ap