Electronics Forum | Wed Oct 17 09:16:44 EDT 2012 | engineerjim
We are going through the motions of acquiring and setting up a new to us wave solder machine. My question, is any utilizing a solder/flux containment pan or other type system beneath the wave to help keep areas around the wave solder machine cleaner
Electronics Forum | Sat Oct 20 14:18:49 EDT 2012 | davef
I've been in shops with a flux containment pan under the wave fluxer. While I'd rather see excess flux in a containment pan than on the floor, but I'd prefer to see flux applied precisely to eliminate the need for either using a containment pan or cl
Electronics Forum | Mon Dec 27 19:10:58 EST 2021 | ppcbs
The component should float into place provided you have the correct amount of solder paste. Perform a solderability test on the pads. We have come across new components with oxidation that prevents wetting. This will cause components to not self ali
Electronics Forum | Thu Jan 13 22:45:50 EST 2022 | tey422
Seem like extra soldering would really helps it. Adding solder beads by using pick & place machine is more of a consistent way to add extra solder where you need it the most. No matter how you modify the stencil, there is still limits how much you ca
Electronics Forum | Fri Jan 14 23:31:35 EST 2022 | tey422
First of all, like I said before, I only worked on similar type of part. For this part, I would add at least 1 of 0603 size solder bead at each end (091845.jpg), 2 of 0402 size solder beads side by side would be even better.
Electronics Forum | Tue Jan 04 17:08:34 EST 2022 | tey422
I used to work with boards with similar parts like it. There are two key things to do to reflow it. 1st is to have extra solder, which by adding solder beads using pick & place machine to place on top of the solder paste. 2nd is to have the using th
Electronics Forum | Wed Dec 22 17:49:06 EST 2021 | mihai_voivod
I have this part: 142-1711-801 (Emerson). It is an SMT/TH part. https://www.digikey.com/en/products/detail/cinch-connectivity-solutions-johnson/142-1711-801/9992851 I want to reflow the part instead of hand soldering and/or reworking the solder jo
Electronics Forum | Thu Jan 13 22:05:46 EST 2022 | mihai_voivod
-Thank you Thomas. In the past I have tried using a clip to hold it in place and it partially worked as a significant amount of connectors ended up shifted causing defects and necessitating rework. -I am going
Electronics Forum | Fri Jan 14 22:07:19 EST 2022 | mihai_voivod
Hi Thomas, May I ask how much paste/solder do you put on this part?
Electronics Forum | Mon Mar 31 13:51:33 EDT 2008 | gregorys
Hi! May be somebody help me with links to materials or document`s for assign separate (separate room) installation of cleaning equipment from all another SMT line. p.s. some managers of my company want to install solvent based cleaning units in same
