Electronics Forum | Fri Aug 04 04:26:31 EDT 2000 | Charles stringer
I am experiencing a problem when soldering down a TO263 package. The device has a large solderable tab (approx 8mm square)on the back and 5 leads. Sometimes the leads are not soldered to the board properly. I am using a metal mask with 9 "windows" of
Electronics Forum | Thu Aug 10 21:25:57 EDT 2000 | Dave F
Charles: Thank you for closure. It's nice to learn the answer.
Electronics Forum | Wed Aug 09 22:00:44 EDT 2000 | Dave F
Hey Charles!!! Where in earthly heaven did you get a TO263 with "large solderable tab (approx 8mm square) on the back and 5 leads"? All the TO263s that�ve reached-up and smacked me have been "TO220s" with a modified tab and three leads that are f
Electronics Forum | Thu Aug 10 12:14:12 EDT 2000 | Charles
It looks like a giant dpak device but with 5 leads. The problem is that on approx 3% of our boards one more pins are open circuit. It appears that the pins are not in contact with the pads. Board is HASL finish IR oven Paste Koki 953i. If you have a
Electronics Forum | Mon Nov 14 09:57:37 EST 2005 | davef
If the solder that you apply bonds well to the metal terminations of the transformers, your customers should have no solderability problems related to your components.
Electronics Forum | Thu Apr 17 07:44:59 EDT 2008 | GSx
Check for lead finisching Lead Free finiscing like (e4), in case of AgPd plating you may have similar soldering problems Regards
Electronics Forum | Fri Nov 11 04:35:06 EST 2005 | Rob
Hi Arnold, Some wave solder machines have a preheat function, that raises the board temperature before soldering. Some transformers use single use thermal fuses/TCO's inside, that trip at a set value (in a range approx. 70 degrees C to 180 degrees
Electronics Forum | Fri Nov 11 04:06:46 EST 2005 | arnold
we are manufacturer of molded type transformer. we have a trim and form process and its damage the pins of our units. the TIN insulation was being damage so we decide to immediately solder (wave soldering) the units to avoid oxidation. my question is
Electronics Forum | Tue Apr 15 03:16:14 EDT 2008 | janz
Hello, We are having a problem with soldering QFP100 (16mmx16mmx1mm). Board dimensions: 70mmx50mmx1.8. FR4 two layers � single SMT assembly. Finish: HASL-lead free Oven: 7 zones �hot air Paste: lead free We have noticed that two groups of legs
Electronics Forum | Tue Nov 05 16:41:53 EST 2002 | Ray M
This one's got me stumped, so I thought I'd throw it out for discussion: I have a 20 pin SMT ribbon connector by Molex that I've been using for about a year without problem, but recently things aren't looking so good. The solder is pulled up off of