Electronics Forum | Wed Sep 21 12:30:03 EDT 2005 | Rob
Hi Greg, We've used lots of machines over the years & seen lots of different tape related issues - the main one being snap off of the cover tape, usually due to too much glue, over entusiastic heat seal, or a feeder requiring maintainance. Also the
Electronics Forum | Sun May 05 10:36:08 EDT 2013 | mbb
Hello, We are using Panasonic pick and place machine. I would ask if there is anyone from Panasonic to tell us which is the tape splicing method the most adequate to Panasonic feeders?
Electronics Forum | Mon May 06 07:22:23 EDT 2013 | cbeneat
Do you have the splice manual? I can email you a copy, send your email address to me I will send it out.
Electronics Forum | Mon May 06 09:01:08 EDT 2013 | mbb
Yes, we have manual splice either with a joint tape or with both clips and joint tape . Please, If you have any suggestions, email me on: mariem.khlifi@ymail.com
Electronics Forum | Thu Jun 22 11:20:13 EDT 2000 | Neil
What role does materials and process selection play in helping make products more environmentally friendly?
Electronics Forum | Mon Dec 18 01:25:47 EST 2006 | seety1981
test engineer and product engineer... Hi all, Sorry if this topic is not suitable to be in this forum.. anyway,... i would like to know what the different of the jobs scope between the Test Process and Test Product engineer in semiconductor manufac
Electronics Forum | Wed Jul 27 16:27:57 EDT 2005 | GS
It may be you should look for higher TG of Durapol Rgds GS
Electronics Forum | Wed Apr 06 08:27:12 EDT 2011 | kaschliman
Our two component suppliers use 99.5Sn/0.5Cu and 97Sn/3Ag solder (respectively) for tinning their leads. We use 98.9Sn/.66Cu/.33Ag solder in our wave solder machine. Is there any significant advantage to either tinning process regarding solderabili
Electronics Forum | Wed Jul 27 22:09:49 EDT 2005 | Ken
My policy is not to mix them. You have zero cross contamination potiental with this policy.
Electronics Forum | Wed Jul 27 16:46:48 EDT 2005 | russ
I don't think that you would need to test these. Have you ever seen any evidence of solder sticking to them? We use the same material and never notice anything besides flux staying on the bottom. Would the lead absorption if any even be of a concer
winsouce.jpg)