Electronics Forum | Fri Apr 02 14:18:41 EST 1999 | Tony A
Anyone knows what is the optimum squeegee angle for screen printers.
Electronics Forum | Fri Apr 02 22:01:19 EST 1999 | Dean
| Anyone knows what is the optimum squeegee angle for screen printers. | | 45 Degrees. The forward velocity creates a downward pressure equal to the vector pressure (equalibrium). This is commonly known as paste "rolling action". Too obtuse an an
Electronics Forum | Tue Apr 06 10:30:48 EDT 1999 | Scott Davies
Tony Although I agree in principle with Dean that 45 Degrees would be ideal, most of the squeegees I have worked with have been 60 Degrees to the stencil surface. This seems to work best with metal squeegees when printing HASL boards, because the sl
Electronics Forum | Wed Apr 07 11:42:16 EDT 1999 | Tony A
| Tony | | Although I agree in principle with Dean that 45 Degrees would be ideal, most of the squeegees I have worked with have been 60 Degrees to the stencil surface. This seems to work best with metal squeegees when printing HASL boards, because
Electronics Forum | Thu Dec 08 16:44:18 EST 2005 | eeltec
I am looking for Metal Squeegee blades, 15 7/8" long, angled, for a deHart stencil printer model EL-20. Can you recomend me a good and unexpensive supplier? Thanks Greg
Electronics Forum | Mon Jun 27 11:24:03 EDT 2005 | russ
What size paste roll do you have on your stencil? It should be about 1/2" in diameter. What type of paste are you using? I have found that certain Mfgrs have this problem with some of their formulations. What typoe of printer and what is your squ
Electronics Forum | Sat Aug 26 09:40:27 EDT 2017 | v037022
Dear, My current method incluce steps below: 1. take out all screw 2. Put them into alcohol 3. Clean it with bemcot paper which wet by alcohol 4. Dry it by air gun 5. Checking by Dino camera. It took so much time. Now i want to do it automatic to red
Electronics Forum | Thu Oct 23 08:13:44 EDT 2003 | davef
The SEMA listing [ http://www.smema.org/smema5.pdf ] says: * D CUT SQUEEGEE: A single diamond edge squeegee which is shaped like an upside down house and made of polyurethane. * FOUR-SIDED DIAMOND EDGE SQUEEGEE: A polyurethane 3/8 x 3/8 four sided, f
Electronics Forum | Tue Mar 15 19:17:26 EST 2005 | yoman
Thanks for your reply. We are using EKRA E4 Inline Automatic Stencil Printer. It is Capable of Automatic stencil inspection. 2D solder coverage inspection. Fix Squeegee angle at 45 degees angle. Programmable squeegee speeds and pressure, boards snap
Electronics Forum | Mon Mar 13 22:27:45 EST 2006 | davef
adjustable angle of attack squeegee
.gif)
winsouce.jpg)
