Electronics Forum | Thu Sep 30 07:34:27 EDT 2010 | sibbe
Hi, We are having some serious issues with placing the Luxeon Rebels. The problem is caused by the components sticking to the tape. We don’t know what causes it, but I remember to have read something about components sticking to the tape on this For
Electronics Forum | Mon Jul 30 21:12:10 EDT 2012 | davef
We're seen components sticking to adhesive that was slobbered on the inside of cover tape.
Electronics Forum | Mon Oct 04 09:27:43 EDT 2010 | floydf
We have found that the lenses on the Rebels have are gooey and sticky. We put a little bit of WD40 on the shutter part that contacts the lens. Just a little bit. Basicly, put a drop on and try to wipe it all off with a paper towel is enough.
Electronics Forum | Thu Jul 19 18:15:15 EDT 2012 | jil2000
We have a material that is been stick at cover tape, only 1 supplier is failing and only embossed tape packing is failing. A dark spots between tape and component are observed, we already bake material to se if is humidity, is not. We already apply
Electronics Forum | Sat Aug 18 23:03:07 EDT 2012 | eadthem
We have had this problem in the past, On paper tape resistors(old stock from before i took over and forced rotation on everything) and on embossed (national semi parts, strings of glue pulled back like seat belts across the pocket.) For the national
Electronics Forum | Tue Jul 13 05:21:04 EDT 2010 | bubbobbed
Guys, I've received complaints from customer that the chip is sticking on the cover tape or carrier tape when detape. Is there any possible that i can solve the problem by changing the cover tape or carrier tape?? some say the root cause of this issu
Electronics Forum | Tue Jul 13 14:25:09 EDT 2010 | davef
While you're waiting for others to reply, here's link to a recent thread that seems similar to yours: http://www.smtnet.com/Forums/index.cfm?fuseaction=view_thread&CFApp=1&Thread_ID=14787&mc=13
Electronics Forum | Wed Jun 04 11:42:04 EDT 2008 | tech1
All vibes are crap, these things are just as good as tape now
Electronics Forum | Wed Aug 31 11:23:39 EDT 2022 | stephendo
I don't know Juki but I know stick feeding SO8 ICs. If you have a lot of them regularly then consider getting a tape and reel machine.
Electronics Forum | Thu Jan 14 15:44:20 EST 2016 | sssvajunas
Hello, after we finish project (mydata) we unload tape from feeder and place a stick on the edge of tape. Maybe somebody can help with alternatives to this? (plastic clips) becouse then unloaded tape is used for another project it is sticky
COT specializes in high quality SMT nozzles and consumables for pick and place machines. We provide special engineering design service of custom nozzles for those unique and odd components.
2481 Hilton Drive
Gainesville, GA USA
Phone: (770) 538-0411
