Electronics Forum | Wed Apr 04 08:45:37 EDT 2007 | meritajs
Hi, colleagues! We only start using pb-free tehnology Our wave have foam fluxer What kind of flux would be best if we will use Sn100 solderbar What is your experience Best regards Peter
Electronics Forum | Thu Dec 03 14:37:53 EST 2015 | proceng1
Are you running a water or alcohol based flux? We run a water based product and it stays in the tank with the stone all week and is emptied and cleaned at the end of the production week. Never once have I stored the stone in thinner and I've never
Electronics Forum | Sat Nov 07 18:18:58 EST 2015 | ttheis
Hi everyone, We just got our first wave soldering machine operational (novastar 8s) and its working great. I'm just a little unsure about how to best maintain the foam fluxer daily. Do you drain it from the machine each day or just cover the flux t
Electronics Forum | Thu Dec 03 15:34:57 EST 2015 | proceng1
Superior 420-XF-LF is what we use. When we switched, it took some time of just running it through the stone before we got the optimal performance. Especially when going into the clean and dry tank on monday morning, we usually let the fluxer run for
Electronics Forum | Sun Nov 08 15:27:25 EST 2015 | davef
Thinner: Flux thinner, NOT paint thinner We kept a spare stone in thinner in inventory. We cut PVC pipe to size, cap in one end, screw thread on the other, stone inside, filled with flux thinner and covered with a screw cap. I don't remember who we
Electronics Forum | Thu Feb 08 08:37:55 EST 2018 | proceng1
We have two Wave Solder machines and still use the FOAMING flux, but the formula we used to use was discontinued, and the one we are currently using isn't as good. I'm hoping that others are still foaming and will share what flux formula they are us
Electronics Forum | Fri Apr 02 02:37:43 EST 2004 | darburch
We are asking $10,500us for this machine, as for shipping I will see what I can come up with as we are in Canada. This is a dual wave machine with foam fluxer. It has not run in 3 years but when we had it in production results were favorable and cons
Electronics Forum | Wed Feb 14 15:34:37 EST 2018 | cbart
We have two Wave Solder machines and still use > the FOAMING flux, but the formula we used to use > was discontinued, and the one we are currently > using isn't as good. > > I'm hoping that others > are still foaming and will share what flux >
Electronics Forum | Tue Dec 28 21:51:04 EST 2004 | KEN
When using a foam fluxer: 1. Bubble size is important. What stones are you using? Ever clean them? Too large a bubble will NOT help your situation. (I forget bubble size range....check with your fluxer mfgr.) 2. Thinner will help in capilary m
Electronics Forum | Thu Dec 26 17:01:59 EST 2002 | alandra516
Store the flux stone in PVC pipe (capped at the end) and fill the pipe with Isopropyl Alcohol.
winsouce.jpg)
