Electronics Forum | Mon Aug 08 10:27:15 EDT 2005 | russ
I am a contract Mfgr. and we receive these designs quite frequently. ENIG is the finish and the designs do utilize pushbutton switches from membranes. I am not provvy to any reliability or performance data but we process alot of these designs. If
Electronics Forum | Mon Jul 13 17:01:03 EDT 2009 | davef
So, what happens when you: * Run the switches through the reflow oven as piece parts, not assembled on the board? * Pot the switches as piece parts, not assembled on the board?
Electronics Forum | Mon May 25 20:17:56 EDT 2009 | paligora
Hi , we have problems with the pick & place nozzle when assembling data switches on the PCB. The SMT switches have top surface with diameter of 2.6mm and our supplier is suggesting that if we need to replace the current nozzle which has oval suction
Electronics Forum | Mon May 25 21:27:07 EDT 2009 | paligora
Our machine is YAMAHA YVL88II and the issues we have with these data switches are either not being picked up from the feeder at all or are being ped before assembly.
Electronics Forum | Thu Apr 30 02:09:50 EDT 2020 | bukas
Thank you for you reply yernie. This forum is about industrial electronics assembly machines and technologies and not about smartphones. btw, the problem was IF board if anyone was wondering.
Electronics Forum | Thu Aug 12 06:46:35 EDT 2021 | bukas
there is no, error $0022 in technical reference. is the error you are getting a EMER level? if so there is probably a safety sensor or switch that is causing this error. $0021 is related to door switch so I would go from there. do you have technical
Electronics Forum | Fri May 27 14:22:47 EDT 2022 | proceng1
I am not exactly clear on what you are looking for. From my customers, assembly drawing notes are assembly specific. If there is hardware, they might include the stack-up. If we are conformal coating, they usually indicate keep-out areas. If an LED
Electronics Forum | Fri Jun 09 09:52:03 EDT 2023 | tommy_magyar
I agree with Mainteneer on this. Depending on the active components, I would check the datasheets of them. Particular groups of components to pay attention to: microphones, microprocessors, transformers, relays, switches. Washing may be in some cases
Electronics Forum | Sat May 12 01:46:19 EDT 2012 | miulius13
Hello guys, I hope this thread is located properly! I have few designs made in OrCAD Layout and I need to switch them to automatic assembly but I've been told that I need pick and place files for them ... hence my request for you: How can I export t
Electronics Forum | Wed Mar 20 06:26:46 EST 2002 | hany_khoga
Thank you Stefan but unluckyly those board have many PTH components so that they can not re-enter the reflow oven. But by the way , are you sure that if we switch off the cooling zone we can find the solder still liquid? Hany
Golden State is a contract manufacturer that makes wire harnesses, electromechanical assemblies (box builds, subassemblies, PCBAs, kits, etc.) and services (sorting, rework, value additive manufacturing engineering)
18220 Butterfield Blvd
Morgan Hill, CA USA
Phone: 5102268155
