Electronics Forum | Thu Jul 24 07:52:58 EDT 2008 | davef
We assume the silk screen is epoxy. If so,: * Easiest: 'black-box' the undesired area by printing epoxy on top of the undesired area. You could use a stamp-pad easily. * Fairly-easy-but-messy: use a Dremmel-type tool to remove the undesired area. Thi
Electronics Forum | Wed Aug 18 21:10:23 EDT 1999 | se
| | | Hi, | | | I'd like to ask some tips about the merits and shortcomings o | | | of both screen printer and stencil printer. For small quantity and highly mixed usage, which type of printer is suitable to our | | | application? | | | The board
Electronics Forum | Wed May 09 08:48:51 EDT 2012 | leemeyer
Try going into the program definition screen and delete the permanent table top. Then shut down and reboot. The permanent table top will be re created upon reboot.
Electronics Forum | Thu Jul 13 22:20:38 EDT 2000 | Dave F
=10 mils larger than lead 3 silk screen legend text weight >=10 mils 4 pads >=15 mils larger than finished hole sizes 5 place through hole components on 50 mil grid 6 no silk screen legend text over vias (if vias not solder masked) or holes 7 so
Electronics Forum | Mon Dec 10 13:23:51 EST 2012 | ericrr
Thank you ENIAC for your input. The engineer who did the PCB says all his figures are correct. I over came the problem by moving the X coordinateness of the 2nd BOC mark (top left on the picture) over just slightly in the file (measured by the dis
Electronics Forum | Tue May 28 21:00:59 EDT 2002 | davef
That is the rub here, isn�t it? For those posting, it�s easier [but much slower] to start a new thread than to search the archives. [And posters could view their issue so unique and novel that it could never have been discussed several years earlie
Electronics Forum | Mon Dec 01 12:39:06 EST 2008 | tsvetan
this is really nice one ;) paper and cotton have lowest potential to generate static electricity see below, and usually is good practice to wear cotton glowe at least to one of your hands to not leave greasy finger spots on the gold finish of the PC
Electronics Forum | Thu Jul 10 09:55:47 EDT 2003 | davef
A reading of the pictures is: A1: Looks like pad [B1] is smaller than the other pads. It�s weird that the pads are such different colors. A2: Looks like pad [B1] is smaller than the other pads. Solder mask opening [B1] is misregistered and seems s
Electronics Forum | Sun Nov 01 23:51:44 EST 2009 | boardhouse
Hi Julie, My opinion is that the top board would not pass IPC, solder mask encroachment on pads. Second board is what we call Orange peel,this can be caused two way's. 1) the solder mask was not tack dried enough prior to imaging which caused artwo
Electronics Forum | Tue Jul 19 08:12:23 EDT 2005 | davef
We agree with Rob. It looks like either kiss is blowing the paste around. It could be: * Nozzle id too large. * Kiss is occuring after the head has moved from the component. 0408%20MS%2001.jpg - Paste is not missing on the bottom-center pads. It is