Electronics Forum | Fri Jul 26 08:25:25 EDT 2013 | emeto
If there is a way to pre-tin the parts, that might help in forming better joint with gold.
Electronics Forum | Thu Jul 29 21:11:13 EDT 2004 | davef
Could be lots of things. With limited information about temperatures, solder alloy, and cleaning; we'll swing for the fence that you got these solder connections very hot. So hot that Pb oxide is dominating the solder joint surface instead of the
Electronics Forum | Fri Jul 26 05:14:38 EDT 2013 | anilw2006
We had a solder joint problem in gold plated PLCC68 ic. We do double sided reflow process with Cookson OL107F paste. First we do top with paste and second with glue process.The solder joint shape and wetting looked normal.In the process of testing
Electronics Forum | Thu May 26 21:09:01 EDT 2005 | thaqalain
The reliability of a Gullwing component solder joint is in question when insufficient solder is evident: *at the heel of the lead *at the toe of the lead *none of the above
Electronics Forum | Wed Jan 16 11:20:52 EST 2002 | bentzen
Hi... We tend to do a lot of footprint calculating for new SMD components. But what about the amount of solder paste on the solder pads. The amount of solder alloy is of cause determined by the stencil aperture size, stencil thickness and the sold
Electronics Forum | Wed Jan 16 12:04:45 EST 2002 | dason_c
You can use the IPC-7525, Stencil Design Guidelines for start up.
Electronics Forum | Mon Jul 29 05:48:35 EDT 2013 | anilw2006
Thanks for support. Is it any special process of pre-tinng? Regards, Anil wagh.
Electronics Forum | Tue Jul 27 13:48:45 EDT 2004 | Ralf
Hi Recently i have noticed that after reflow (hot air oven) on the solder lands without components but with solder(screen printing) there is discoloration. It looks like gasolin spilled on the wet road (rainbow). Any idea and reason Ralf
Electronics Forum | Tue Jan 15 06:05:37 EST 2002 | Romain
Dear all We have since few weeks problems with BGA solder joint integrity on ENIG finish. Under relatively very flexible of the FR4, the joint breaks between ball and PWB. When we take off the BGA for analysis, some of the pads seem very flat, totaly
.gif)
