Electronics Forum | Wed Apr 23 10:51:09 EDT 2008 | ap
has anyone come across labelling of SMT carrier tapes? we test devices in a automated handler, but get some customers asking if we can apply numbered labels to the tape to identify the device, ie one label per device. This seems a bit crazy as the s
Electronics Forum | Fri Feb 07 13:27:22 EST 2014 | leemeyer
Hover Davis makes a feeder for labels that works with many pick and place machines. Identco is a distributer for them and may be able to help with the material to.
Electronics Forum | Tue Aug 12 11:17:19 EDT 2014 | g2garyg2
This is helpful information. PROMATION just released a low cost stand alone pick and place for pre-printed labels which would also include Kapton Dots. So if you do not want to tie up your pick and place this could also be an option for placing them.
Electronics Forum | Sun Dec 04 02:20:20 EST 2011 | ngineer
I just got my hands on a Quad IVc, and am trying to find information on a Z-axis Error # 5 @ startup. I haven't really done anything since recieving the machine, I powered on, the Transport moves back and forth, the pc boots and I press enter to log
Electronics Forum | Thu Jun 15 22:03:32 EDT 2006 | Frank
You are correct, the Hover Davis label feeder works on 'un-punched' flat carrier. Get a sample of your dots on the tape and send it to Hover Davis to see if their feeder will work for you. The Hover Davis feeder will peel the dot off of the tape so
Electronics Forum | Wed Jul 24 10:57:32 EDT 2019 | aharper
We recently acquired an EKRA E5 (vintage 1999), and I am receiving a "Machine Offline" error. I discovered a cable labeled "X20b" that is disconnected, but I cannot find the port it should be connected to. I do have the manual but have not found any
Electronics Forum | Tue Sep 14 13:40:50 EDT 2004 | paul_boxboro
I feel your pain. Your company may already be using Kapton tape labels for their board serial numbers labels. Kapton is able to withstand repeated wash and heat cycles, and can be printed on a typical Zebra printer. The key to a successful and accura
Electronics Forum | Wed Jun 14 08:52:03 EDT 2006 | adlsmt
Is anyone aware of any manufacturers of kapton dots for masking boards that come on tape with feed holes punched on the side? It seems like it would be pretty easy to modify a standard feeder to to do labels if the carier was punched for a standard f
Electronics Forum | Fri Nov 18 12:29:06 EST 2005 | procimprov
Is the a good, cheap automated way of labeling the trays that PCB's go on? We currently use masking tape with assembly and work order numbers but half the time we can't read the operators handwriting. We have looked into some label printers, but not
Electronics Forum | Wed Jun 21 16:09:14 EDT 2006 | adlsmt
Yep, we either use kapton tape or mask now depending on the application. It would be nice to be able to do it on a machine but the Hover-Davis label feeders are very expensive. May not be worth the cost for the volumes we run.
winsouce.jpg)
