Electronics Forum | Mon Aug 21 04:20:49 EDT 2006 | Rob
Hi Mika, I used to work for the largest chip cap manufacturer in the world, and by far the largest problem we would see was cracking due to incorrect z height adjustment on Chipshooters. It can also cause solderballs and bad joints by displacing th
Electronics Forum | Mon Aug 21 10:36:25 EDT 2006 | vikkaraja
I Think I understand your problem. But I think it would be best if you just go in the program and change/check your componet height as needed. It does not take much time. Check your cap height, modify shape data as needed, generate your program and
Electronics Forum | Fri Aug 25 11:29:09 EDT 2006 | mika
Thanks all for Your input. The thing is that we want to avoid to go in to the pattern program and change the height in the middle of running a board. For ex. We start a product, feeders are loaded in advance in the feeder preparation area, operator
Electronics Forum | Sun Aug 20 02:31:18 EDT 2006 | daxman
Last week, when we turned on our IP3, we received an error on our IP3, which read "Fatal Error with VP Turn Power Off" We had been running product the day before, and the day after we received this error. The function keys are locked and will not w
Electronics Forum | Thu Aug 24 08:49:20 EDT 2006 | nodlac
Hi Jerry- The belt splice kit we used were made by Eagle Belting Company (Now Fenner). You are correct in the splice process...one other thing we did was trim the extra "roll Back" or flash of melted material. I prefer the Mini or regular but splic
Electronics Forum | Fri Aug 25 07:38:12 EDT 2006 | CL
Hi CP, I used to work for a flex circuit manufacturer. I am at a CM now and am we have started building RoHS production status assemblies. I personally think flex circuits will have a difficult time with the required temps for RoHS. I spoke to someo
Electronics Forum | Tue Aug 22 03:04:07 EDT 2006 | PP
Any help/suggestion is much appreciated I am doing lots of BGA Reworks from a small uBGA with a few balls to a large BGA with over 1500 balls. The reworks have been done on SRT 1100 Series Machine for many years. SRT 1100 Machine is good for the c
Electronics Forum | Thu Aug 24 19:26:07 EDT 2006 | darby
Dave, Cygnal was taken over by Silabs. I based my design on the second link that you provided. Tell me folks, are you using one large pad with only the stencil having the grid, or are you actually breaking up the large pad into grids with mask around
Electronics Forum | Tue Aug 22 13:13:30 EDT 2006 | slthomas
We are a low volume (100k-150k parts per month) high mix shop that is equipped with a couple of Quad IVc's. The machines meet our overall capacity needs but can not give us the quick turns we need if we get hit with multiple large setups at once.
Electronics Forum | Tue Aug 22 15:57:17 EDT 2006 | slthomas
As far as room goes, I have to talk my boss into getting rid of some other crap around here before looking at the Mydata. The room is there, it's just occupied by stuff we NEVER use. My understanding of the TP-9 is that it's considered flexible but