Electronics Forum | Wed Jun 30 15:02:17 EDT 2004 | shk5678
Dear Michael Usually the equipment you need is: Universal Instruments 6772 Multi Mod IC Inserter. Universal Axial Inserter either a combination unit or 2 stand alone units one that sequences the parts and one that inserts them. Universal Instrume
Electronics Forum | Wed May 27 14:35:52 EDT 1998 | Justin Medernach
| | R&D is currently designing a board with smt components on both sides of the board. They are adding a 16 pin IC Gull wing. on the bottom side of the board. I have asked for only caps and resistors to be placed on the bottom side. Is there a recomm
Electronics Forum | Wed May 27 13:42:08 EDT 1998 | Chrys
| R&D is currently designing a board with smt components on both sides of the board. They are adding a 16 pin IC Gull wing. on the bottom side of the board. I have asked for only caps and resistors to be placed on the bottom side. Is there a recommen
Electronics Forum | Sat Aug 21 15:02:32 EDT 2010 | jry74
I have a pcb with 750 plated through holes that get Holtite sockets inserted into them. I have a method of pressing in 10 sockets at a time. However, when we are done, the board has bad warpage on the X and Y axis. Does anyone out there have any t
Electronics Forum | Thu Mar 12 10:25:06 EDT 2009 | smt_guy
I have Through Hole Assembly Boards that require Conformal Coating but the customer did not specify which area or parts should not be coated. Upon asking them they are also not sure about it. I have Transformers, PLCC's on a socket, IC's on a Socket
Electronics Forum | Fri Jan 21 13:02:08 EST 2005 | cyber_wolf
If I understand you correctly here are my recommendations: 1. You should not need to have your machine read more than (3) fids to place your sockets. 2. It sounds to me like your currents fids are through holes that are getting paste printed into
Electronics Forum | Wed Apr 06 11:10:47 EDT 2005 | smt_rookie
We process a double-side reflow board (10 ups). Chips and IC's on the bottom side while chips, IC's plus thru-hole connectors and IC sockets on top side (bottom side first then top side reflow). In the past, we were not encountering any soldering pro
Electronics Forum | Thu Jul 13 22:20:38 EDT 2000 | Dave F
=10 mils larger than lead 3 silk screen legend text weight >=10 mils 4 pads >=15 mils larger than finished hole sizes 5 place through hole components on 50 mil grid 6 no silk screen legend text over vias (if vias not solder masked) or holes 7 so
Electronics Forum | Thu Jul 20 14:52:05 EDT 2000 | Bob Willis
If you are talking about Pin In Hole Reflow that is not true, I hope it was not my friends at Speedline that told you that. Stencil printing of paste for through hole reflow can be done. If you get all the parameters right it can give you joints lik
Electronics Forum | Wed Jun 29 14:40:12 EDT 2011 | wrongway
Hello All We are currently running 3 universal smt machines one is an advantis lighting head all 3 machines are 2007 we run 2 shifts 5 days a week I have had very little trouble with them or the feeders. we have 2 universal through hole machines one