Electronics Forum | Tue Feb 27 11:03:09 EST 2007 | Marcin
Hi All, Anybody knows what is the minimum clearance between through hole component and chip component? Problem description: On bottom side of my pcb are only 0603 chip components mounted on glue. One of the component is located very close to hole
Electronics Forum | Wed Nov 19 21:39:18 EST 2014 | gregp
Hi Spoilt...thanks for your reply. The latter part of your reply is a bit perplexing though. The CS-400E is easy to set up. There are two lights spots that indicate the insertion location. The component does not need to be prepped other than bent
Electronics Forum | Wed Sep 11 15:12:02 EDT 2013 | rway
"Do you think these machines are less appropriate for smaller lot sizes and PCB's with just a few through hole parts?" That depends. It will still save time if your lot sizes are small, as opposed to hand placement. I would not recommend buying an
Electronics Forum | Fri Nov 21 11:40:53 EST 2014 | gregp
Hi Spoilt, Thanks again for the feedback. It is really an eye opener for me. What I fail to realize is that perception, whether right or wrong, plays a big role in whether or not someone might consider a process change. Your first comment is reall
Electronics Forum | Wed Feb 01 10:53:56 EST 2006 | edruppert
AMS, Are you aware that you will have to purchase several types of insertion equipment for different part types? You will need an axial inserter, radaial and DIP inserter to cover the gamut of thru-hole insertion. Even then you may not cover oddba
Electronics Forum | Tue Jan 18 12:36:11 EST 2000 | Dave F
Dave: I haven't located something to support your contention, yet, and I'm not going to comment on the factors that drive reliability beyond component selection, because I know that you've got some sweaty-palmed sales type wringing his hands waiting
Electronics Forum | Tue Nov 02 23:22:23 EDT 2021 | assuredtech
What is the: MFG ? DOM? MODEL Number:? What are you using for Programming software:? Do you have replacement parts on hand?? Where is the machine located? Have you been running the machine for awhile with a known good board and component and now a pr
Electronics Forum | Wed Sep 07 09:34:15 EDT 2005 | PWH
Does anyone know of an IPC standard that deals with drilled holes in a PCB in relation to pad location? We have a PCB where the holes are very close to (through the edge of in some cases) a SMT component pad on a PCB.
Electronics Forum | Mon Jul 01 13:55:16 EDT 2002 | Sherry E. Howard
Thanks for the article locations!
Electronics Forum | Sat Feb 27 20:06:13 EST 2010 | jmelson
Oh, the CSM only has one XY offset for each feeder rail. If you don't like it, you can teach any particular feeder location. The crazy thing is the teach camera is an inch in front of the heads (-25 mm Y) so you can't put the teach camera over the
