Electronics Forum | Wed Nov 23 19:50:23 EST 2016 | gmscribe
Hi guys, I'm working on a design involving a 223-pin BGA with 0.5mm pitch (ball size 0.3mm) with a 16-bit DDR3 controller involved. Currently routing a track between two balls is resulting in a track width of 0.1mm and a spacing of 0.077mm. Now the
Electronics Forum | Tue Aug 28 12:25:26 EDT 2001 | Steve
To be honest with you, it doesn't really matter how you present the data, as long as you understand what the problems are. Bottom line is who cares what the numbers are unless you are doing something about it. Are you able to track the individual de
Electronics Forum | Wed Sep 05 08:22:48 EDT 2001 | davef
Jack Crawford, IPC Director of Assembly Standards and Technology says "IPC-7912 is used for end-item DPMO calculation; one gathering of DPMO data at the end of the entire assembly process. IPC-9261 will be used throughout the manufacturing process so
Electronics Forum | Tue Aug 28 12:05:42 EDT 2001 | mparker
The advantage of DPMO is that the numbers used are PPM, (Part Per Million), rather than percentage. Percentage can distort, depending on volume. For instance, 100 units processed, 25 defects found = 75 percent yield. 4 units processed, 1 defect found
Electronics Forum | Fri Apr 13 22:56:02 EDT 2001 | gdstanton
I've been chipping away on a solder bridging and poor fillet wetting problem for a few weeks now (new to the company) and I found two issues. First, after a review of stencil inventory, I found apertures to be oversized when compared to suggested di
Electronics Forum | Sat Mar 06 12:33:21 EST 1999 | Dean
| | I'm having a fun time between BGA rework/repair using an SRT 1000 and SPC efforts (much easier) using DEK stencil printing processes and BTU reflow with 6 Fuji lines in between. | | Concerning the BGA stuff, I'm getting about 60% success using
Electronics Forum | Sat Mar 06 13:34:04 EST 1999 | Earl Moon
| | | | I'm having a fun time between BGA rework/repair using an SRT 1000 and SPC efforts (much easier) using DEK stencil printing processes and BTU reflow with 6 Fuji lines in between. | | | | Concerning the BGA stuff, I'm getting about 60% succes
Electronics Forum | Tue Jul 10 11:25:36 EDT 2007 | jax
Multiple Factors that account for Scrap: During Set-Up: A percentage will not work. When setting up feeders you will normally use a certain length of populated pockets. The amount of parts this affects depends on 1.type of feeder 2.type of part
Electronics Forum | Tue Sep 22 10:52:31 EDT 1998 | Wayne Bracy
| We have problems with voids when we solder lids to | ceramic flatpackages. | The sealring of the package is gold(100 micro inches or 2.5 micro meters)with a underlayer of Nickel | The solder is attached to the lid (preform) and the solder material
Electronics Forum | Sat Mar 06 20:46:21 EST 1999 | Dean
| | | | | | I'm having a fun time between BGA rework/repair using an SRT 1000 and SPC efforts (much easier) using DEK stencil printing processes and BTU reflow with 6 Fuji lines in between. | | | | | | Concerning the BGA stuff, I'm getting about 60
winsouce.jpg)
