Electronics Forum | Thu Mar 31 16:05:22 EDT 2011 | tiffconw
I have older Multitroniks that I am working with. I get error message " can not get retry value" and it locks up machine till I re-boot. I cannot find referance to message in book, anyone know this fix ? Also other problems if any Multroniks people o
Electronics Forum | Fri Dec 16 01:25:35 EST 2011 | AAAA
Hi, We are using CyberOptics Flex Ultra for 7 years, and believe me it requires a lot of time to create and tune up the programs. In my opinion, this machine is not suitable for high mix low volume production. Also we have Omron AOI, which is algor
Electronics Forum | Mon May 02 17:16:02 EDT 2011 | pbiron
We have recently started up a vapor phase machine and no body can tell me what an ideal profile should look like. I preheat the board about 10 degrees lower than the melting point of the solder paste. The joints look great! Just have no documentation
Electronics Forum | Fri May 06 10:18:43 EDT 2011 | bobpan
Hello Doug, There is no tuning up of the cyber-unit. From the symptoms you describe......sounds like the white cable that plugs into the cyber is intermittent. Maybe you can find one somewhere and try that. The cyber unit is a closed assy. and was ma
Electronics Forum | Thu May 12 10:02:21 EDT 2011 | scotceltic
Our company has it's yearly inventory coming up. (Joy). I was wondering if anyone has come across a component counter that can handle radial components in AMMO pack. I have seen plenty out there that can handle counting of radial components in Reel
Electronics Forum | Wed Jun 08 08:33:56 EDT 2011 | fredc
Unless you have a feeder with unusual vibration that is generated during the advance it seems that the issue is packaging. Try another feeder that has been tuned up and properly lubed. Most high speed turret machines move the feeders back and forth a
Electronics Forum | Thu Jun 09 10:01:06 EDT 2011 | pcbrookie
Thanks for the input! In looking at the image again, along w/ some of the others we were supplied with it does look like it could just be too much solder. As mentioned, that does look like a lot of solder bridging up there. It will likely be a wh
Electronics Forum | Tue Jun 28 14:55:11 EDT 2011 | remullis
Typically TH equipment has 2240 Unused steps if no pattern is loaded when running a pattern it takes up whatever amount of steps deducting from the 2240. With no patterns loaded in my axial machine I only have 246 steps. Would this be a time to relo
Electronics Forum | Wed Jun 29 10:26:58 EDT 2011 | remullis
I've been using 29x29 framed screens for years. I have a company that has come up with a adapter that would mount in my screen printer and utilize just the foils of screens. It basically fits and is clamped into the adapter. I am struggling with floo
Electronics Forum | Thu Jul 21 10:48:02 EDT 2011 | emeto
We use QTS and Vectour guard. I would prefer Vectourguard - it is very siple to set it up. However, you have to check the tension of the stencil everyday. I wouldn't trust them as 29 inch hard frame. It is always a metter of quantities. If you deal w
