Electronics Forum | Fri Nov 20 00:16:24 EST 2015 | bwetman
Hyperterminal is a standard Windows assessory located in the "Communications" folder.Here are some steps of data received through the hyperterminal in the PC. (1)Connect your device with your system through RS-232 cable or USB-to-Serial adapter and c
Electronics Forum | Wed Feb 14 13:20:41 EST 2024 | ttheis
We also use macrium reflect and a usb/ide adapter to image all of our machines for backup.
Electronics Forum | Fri Feb 16 17:00:08 EST 2024 | mistrthou
We even used a usb to ide adapter.
Electronics Forum | Tue Jul 02 10:34:48 EDT 2019 | dman97
You should be using the diagram on page 4. 9pin to 25 pin. Flexa settings should be set to NT C/C. You have to make sure that the COM settings in windows are set correctly for the USB adapter you are using. Whatever COM port windows assigns to the US
Electronics Forum | Wed Nov 20 15:20:07 EST 2019 | compit
I formatted with the FORMAT / s command or moved the system with the SYS command - system files are visible. Partition created and active. I ordered the PCMCIA adapter (PCI) only today - USB adapters do not support all cards.
Electronics Forum | Tue Jan 03 12:33:23 EST 2023 | stephendo
Is there any RS232 to USB involved with the machine? I'm guessing that it is a new to you machine that had been running before you bought it. We had an oven like that that would not find the machine. I noticed that a setting had been 2 then later w
Electronics Forum | Thu Feb 05 13:27:39 EST 2015 | spoiltforchoice
I'm not familiar with your machine but is it possible that this dll file is looking for a security dongle of some kind ? This might be a small USB key, a USB device installed on one of the internal headers on the motherboard or something on a serial/
Electronics Forum | Thu Jan 07 09:58:14 EST 2010 | kjs123p
Pull the hard drive out and use a USB to IDE adapter to copy the whole hard drive onto another computer. I do this with my reflow oven and screen printer. It works very well.
Electronics Forum | Mon Dec 23 00:22:58 EST 2013 | basheermd
One of our production plant is currently using your SEica Flying Probe Tester whose model and serial no. is furnished below. Model S22 MT Serial No. 200594. Now, they want to use it for both bare pcb and assemled pcb testing. Please furnish th
Electronics Forum | Fri Nov 20 03:47:22 EST 2015 | spoiltforchoice
When detected, a PCB with an FTDI FT232 IC will install drivers on the host PC and it will appear as a standard serial port. You can transfer data over it in the same way you would any other serial port,you can also inerface with it using FTDI's own
