Electronics Forum | Thu Jul 08 17:57:31 EDT 2004 | codestar
We are looking to automate the pick and place process when it comes to the barcode labels or license plates located on the component reels. Now, prior to pick and placement starting, the reel labels have to be scanned. I have been advised a Fuji CP
Electronics Forum | Sat Dec 17 15:58:57 EST 2005 | Mika
We are also interested in this, but where can we find the dimensions? We have thouht about some kind of a guideline to simplify the way of how we do the "Matrix tray numbers" input to our fine pitch machine. We do a lot of prototype production and ev
Electronics Forum | Fri Aug 26 21:23:38 EDT 2005 | Jes�s Salinas
Hello , In our case we take the results from the repair station. Each test station has its own repair station so from there we count the process defects : placement and printing. The formula used to calculate PPM = DEFECTS / (PARTS PER BOARD x UNITS
Electronics Forum | Sun Jan 25 17:37:51 EST 2009 | jlawson
Valor has a product called vCheck - QA/Process Enforcement System should take a look..
Electronics Forum | Tue Feb 01 11:34:55 EST 2005 | Dougs
Has anyone heard of any software that can be used to clean up or manipulate x-y placement data. We are a small contract manufacturer with various customers, some who supply good x-y data to component centres and some who supply x-y data to a pin or
Electronics Forum | Tue Jan 24 22:32:09 EST 2023 | rgduval
So...FactoryLogix does all of that through integrations with KohYoung and Panasonic (as well as most other machines found in SMT assembly). Realtime data is captured during assembly by UID, and can be viewed in live dashboards, scheduled reports, et
Electronics Forum | Thu May 26 15:28:41 EDT 2005 | jh0n!
It looks like there's another one or two threads somewhat similar, but allow me to pose another. We've only about two years experience in SMD production, and we're just starting to really ramp-up. As we stand right now, I'm not recieving informatio
Electronics Forum | Wed Jun 20 14:34:23 EDT 2007 | pnguyvu
Hi Mark, You can use the software called GC-PLACE to convert centroid, there are alots of SMT process engineer using it. Regards Steve USA STENCILS
Electronics Forum | Fri Mar 28 21:43:57 EST 2003 | MA/NY DDave
Hi Yes to your stone question. This pretty much goes with any flux change. Yes to the proper solvent for the flux you choose. Check with the Kester Data Sheets. Kester should have some application sheets which include some No-Clean information.
Electronics Forum | Fri Mar 28 21:54:54 EST 2003 | MA/NY DDave
Hi Notice they do call out that you should use their thinner. In the MSDS you get a clue as to the thinner they are mostly using with some additives. http://www.kester.com/PDF%20FILES/PDF%20Data%20Sheets/E%20No-Clean%20Fluxes/951%20(30Mar98)logo.p
.gif)
.gif)
